 |
Call: 336-283-0800 |
|---|
Back To Front Page - Contact Info -
AED Carburetors
 | ||
HO-Series | ||
If your looking for a professionally prepared "off the shelf" performance carburetor at an affordable price .... we've got your carb! The "HO-Series" was designed with the Pro-Street and bracket racer in mind featuring clean idle, crisp throttle response, and killer acceleration. These carburetors are equally at home on the street or race track. "HO"s are designed for single four barrel normally aspirated engines. All AED Carburetors are run, adjusted, and tuned on a test engine before shipping to assure the utmost in quality control.
| ||
| 650HO | 650 HO Performance Carburetor | 525.00 |
| 750HO | 750 HO Performance Carburetor | 535.00 |
| 750HPHO | 750 HP "HO-Series" Carburetor | 589.00 |
| 750HB | 750 HO Blower Carburetor | 599.00 |
| 750HO-A | 750 HO Performance Alcohol Carburetor | 699.00 |
| 850HO | 850 HO Performance Carburetor | 599.00 |
| 850HB | 850 HO Blower Carburetor | 679.00 |
| 850HO-A | 850 HO Performance Alcohol Carburetor | 749.00 |
| 950HO | 950 HO Performance Carburetor (HP body) | 695.00 |
| 950HO-A | 950 HO Performance Alcohol Carburetor | 799.00 |
| 1000HO | 1000 HO Performance Carburetor (HP body) | 699.00 |
 | ||
HO Modified | ||
| CNC porting and machining assures the utmost in Airflow along with Booster Signal providing exceptional consistancy and repeatability. We have designated this model the "HO Modified". It includes all the special features and fuel calibration as the "HO" which means milled choke housing, fully machined and deburred main body surfaces, New special Hi-Torque Boosters and metering blocks, four corner idle, dual accelerator pumps, test run with baseline tune-up for QC, non-stick gaskets, and Killer performance. Plus full Porting and Polishing of the main body for additional Airflow and Performance. Actual airflow is considerably higher than unported carburetors, usually well over 50 cfm, but still provide exceptional throttle response because of proper ventura porting. | ||
| 750HOM | 750 "HO-Mod" Performance Carburetor (std. body) | 679.00 |
| 850HOM | 850 "HO-Mod" Performance Carburetor (std. body) | 739.00 |
| 950HOM | 950 "HO-Mod" Performance Carburetor (HP body) | 829.00 |
 | ||
| 1050HOM | 1050 "HO-Mod" Dominator Race Carburetor | 1079.00 |
| 1050-PS | 1050 "Pro-Street" Dominator Carburetor | 969.00 |
 | ||
Max-Pro 4150 | ||
| Top of the line 4150 is our "Max-Pro HP" which includes special Billet Annular Boosters, redesigned 3-Circuit metering, special 1:1 linkage, and all our other great Pro-Series features. This is absolutely the quickest and fastest 4150 style | ||
| MPHP | Max-Pro Billet 3-Circuit 4150 | CALL |
 | ||
Max-Pro Dominator | ||
| Our "Max-Pro" Dominator is designed for large cubic inch applications featuring up to 2.190" CNC throttle bores, venturi sizes to 1.925", billet boosters, machined booster holders, flow rates over 1300 cfm, and all our other great Pro-Series features | ||
| MaxPro | Large Bore Billet Booster HP Dominator | CALL |
| MP-A | Large Bore Billet Booster HP Dominator Alcohol | CALL |
| MP-E | Large Bore Billet Booster HP Dominator E-85 | CALL |
 | ||
Morse Cable Throttle & Spring Bracket | ||
| 6602 | 4150 Morse Cable Throttle & Spring Bracket | 69.00 |
| 6607 | Dominator Morse Cable Throttle & Spring Bracket | 69.00 |
| 6702 | Carter/Edelbrock Morse Cable Throttle & Spring Bracket | 69.00 |
| 6618 | Universal Stainless Throttle Cable | 59.00 |
 | ||
Nitrous Solenoid brackets | ||
| 6082 | Red Anodized Billet Nitrous Solenoid Bracket (pr) | 39.00 |
 | ||
Polished Stainless Dual Feed Line Kit | ||
| quality stainless steel coupled with AN bowl fittings and couplers. They look great, won’t leak, and include all the fittings and gaskets. They have a female 1/8” NPT for adding any AED Fuel Pressure Gauges. The line terminates with a male #6 AN. We have an adapter listed if you want to run to a conventional hose like rubber instead of braided. | ||
| 60945 | Polished Stainless Dual Feed Line Kit 4150 | 55.00 |
| 60946 | Polished Stainless Dual Feed Line Kit 4160 | 55.00 |
| 60949 | #6 fitting to regular line | 9.00 |
 | ||
Polished Stainless Regulator Line Kit | ||
| 6092 | Regulator Braket Only - Red | 37.50 |
| 6093 | Regulator Braket Only - Blue | 37.50 |
| 6094 | Braided Line Kit for Regulator Plate Mallory Holley | 89.00 |
| 60941 | Polished Stainless Holley Regulator Line Kit for 4150 Carbs | 59.00 |
| 60942 | Polished Stainless Mallory Regulator Line Kit for 4150 Carbs | 59.00 |
| 60943 | Polished Stainless Aeromotive Regulator Line Kit for 4150 Carbs | 64.00 |
| 60944 | Polished Stainless Magnaflow Regulator Line Kit for 4150 Carbs | 64.00 |
| 60939 | Polished Stainless Magnaflow Regulator Line Kit for Dominator Carbs | 64.00 |
| 60940 | Polished Stainless Holley Regulator Line Kit for Dominator Carbs | 65.00 |
 | ||
Braided Ful Line Kit | ||
| Holley dual feed carburetors in #6 and #8 line. Come fully assembled including bowl fittings. Our line kits are also available with or without mounted AED fuel pressure gauges. | ||
| 6095 | HOL.BRAIDED #6 GAS LINE | 79.00 |
| 6096 | HOL.BRAIDED #6 GAS LINE W/GUAGE | 95.00 |
| 60995 | HOL.BRAIDED #6 GAS LINE 4160 Vaccum Sec. | 72.00 |
| 6097 | HOL.BRAIDED #8 GAS LINE | 89.00 |
| 6098 | HOL.BRAIDED #8 GAS LINE W/GUAGE | 119.00 |
| 6099 | HOL.BRAIDED #8 LINE (Dominator) | 95.00 |
| 6099A | HOL.BRAIDED #8 LINE (Dominator w/ Gauge) | 129.00 |
 | ||
Billet CNC Metering Blocks | ||
| Standard billet blocks with fixed orifice sizing for all emulsion circuits. Idle fuel & power valve restriction channels are adjustable. Our standard blocks come with a great baseline tune-up right out of the box. "Pro-Series" blocks feature totally tuneable screw-in repalceable bleeds in all circuits. They feature a special length circuit with 5 seperate emulsion bleeds. For the serious tuner trying to fully maximize your combination these are a must! All Billet Metering Blocks are machined from billet 6061 stock & anodized for appearance & protection. | ||
| 6580 | CNC Billet Metering Block (Gas 4150 Complete) | 89.00 |
| 6580A | Pro-Series Billet CNC Metering Block (Gas 4150 Complete) | 119.00 |
| 6581 | CNC Billet Metering Block (Alky 4150 Complete) | 95.00 |
| 6581A | Pro-Series CNC Billet Metering Block (Alky 4150 Complete) | 119.00 |
| 6582 | Dominator CNC Billet Metering Block (Gas 3-Circuit Complete) | 99.00 |
| 6582A | Pro-Series CNC Dominator Metering Block (Gas 3-Circuit Complete) | 119.00 |
| 6585A | Pro-Series CNC Dominator Metering Block (Alky 2-Circuit Complete) | 119.00 |
 | ||
Adjustable Jet Plate Conversion Kit | ||
| Our new “Jet Plates” are machined from 6061 Billet & anodized for appearance & longevity. We offer 2 kits, 1 for side hung float bowls (like 600’s) that come complete with all components plus special nitrophyl float. The second kit fits all center hung float bowls (like 3310) & includes all components needed. | ||
| 6320 | ADJUSTABLE JET PLATE CONVERSION KIT Side Pivot Single Feed | 49.00 |
| 6330 | ADJUSTABLE JET PLATE CONVERSION KIT Center Pivot Dual Feed | 45.00 |
 | ||
CNC Billet Baseplates | ||
| Our new billet baseplates are CNC machined with or without vacuum ports & offer added performance & durability. Our Billet Baseplates are machined from 6061 Alloy & anodized to exacting tolerances & provide an exact fit. They are available BARE or "Pro-Series" with machined shafts, thinned throttle plates, & hi-flow screws. | ||
| 6500 | billet Bare plate - 650-800 | 119.00 |
| 6501 | billet Bare plate - 850-1000 | 119.00 |
| 6505 | billet Bare plate - 650-800 w/Vacuum Ports | 125.00 |
| 6506 | billet Bare plate - 850-1000 w/Vacuum Ports | 125.00 |
| 6500A | Pro-Series Complete with shafts 650-800 CNC | 229.00 |
 | ||
Nitrous Activation Switches | ||
| We use a special Microswitch that has 3-poles so you can also use the additional pole for timing retard or another function that you want activated at WOT. One fits all 4150 Holley carburetors & one fits all Dominators reducing your inventory. They are machined from 6061 Billet, red anodized, & include all the components for a quick easy installation. | ||
| 6086 | Billet 4150 Nitrous WOT Activation Switch & Bracket | 28.00 |
| 6087 | Billet Dominator Nitrous WOT Activation Switch & Bracket | 28.00 |
 | ||
Jets, Plates, Tools | ||
| Jet Plates with differnet jet assortments. All plates are made from 6061 Billet and are purple anodized for appearance and corrosion resistance. | ||
| 6011 | JET PLATE W/JETS (60-69)4 EACH | 69.00 |
| 6012 | JET PLATE W/JETS (70-79)4 EACH | 69.00 |
| 6013 | JET PLATE W/JETS (80-89)4 EACH | 69.00 |
| 6014 | JET PLATE W/JETS (90-99)4 EACH | 69.00 |
| 6015 | JET PLATE W/JETS (60-69)8 EACH | 115.00 |
| 6016 | JET PLATE W/JETS (70-79)8 EACH | 115.00 |
| 6017 | JET PLATE W/JETS (80-89)8 EACH | 115.00 |
| 6018 | JET PLATE W/JETS (90-99)8 EACH | 115.00 |
| 6020 | JET PLATE,TOOL,& BOX | 69.00 |
| 6030 | BILLET ALUMINUM JET PLATE | 27.00 |
| 6050 | JET CHANGE TOOL | 26.00 |
 | ||
AED Carburetor Kits | ||
| ||
| 2300 | 350-500 Holley 2-Barrel Kit | 29.00 |
| 2300A | 350-500 Alcohol 2-Barrel Kit | 49.00 |
| 4150 | 390-1000 Holley Double Pumper Kit | 45.00 |
| 4150A | 390-1000 Alcohol Double Pumper Kit | 65.00 |
| 4160 | 600-950 Holley Vacuum Secondary Kit | 35.00 |
| 4165 | 650-800 Holley Spread-Bore Double Pumper Kit | 45.00 |
| 4175 | 650-600 Holley Spread-Bore Vacuum Secondary Kit | 45.00 |
| 4500 | 750-1250 Holley Dominator Kit | 49.00 |
| 4500A | 750-1250 Alcohol Dominator Kit | 69.00 |
 | ||
"Pro-Series” carburetor kits | ||
Pro-Series” carburetor kits include all the great components of our famous “Ultimate Performance Carburetor Kits” plus the additional hardware that corrodes, wears out, and plain just looks miserable over time. Also Includes New Non-Stick Bowl and Metering Gaskets.
| ||
| 23001 | 350-500 Holley Pro-Series Kit | 45.00 |
| 41501 | 390-1000 Holley Double Pumper Pro-Series Kit | 65.00 |
| 41601 | 600-950 Holley Vacuum Pro-Series Kit | 55.00 |
| 45001 | 750-1250 Dominator Pro-Series Kit | 65.00 |
 | ||
Carter 9000 series and Edelbrock Performer | ||
| including all the gaskets, needle and seats, clips and accessories, accelerator pump, and instructions in one complete kit. | ||
| 4190 | Carter 9000 & Edelbrock Performer Carburetor Kit | 45.00 |
| 5382 | Carter & Edelbrock Float (each) require two | 10.00 |
| 5338 | Carter & Edelbrock Accelerator Pump Assembly | 10.00 |
 | ||
Birchwood Carburetor Spacers | ||
| Birchwood is a great thermal barrier. By keeping fuel bowls cool you get a noticeable increase in fuel density, resulting in a better charge available for combustion. We have seen results on the dyno of up to 20 horsepower. We originally designed these spacers for racing but soon found out the benefits on street cars eliminating hot soak and vapor lock problems associated with high underhood temperatures. | ||
| 6150 | BIRCHWOOD SPACER HOL.OPEN CENTER | 32.00 |
| 6155 | BIRCHWOOD SPACER ROCHESTER Q-JET | 32.00 |
| 6160 | BIRCHWOOD SPACER 4500-OPEN | 32.00 |
| 6165 | BIRCHWOOD SPACER 4500-4 HOLE | 32.00 |
| 6170 | BIRCHWOOD 1" SPACER HOL.OPEN CENTER | 39.00 |
| 6171 | BIRCHWOOD 1" SPACER 4500-OPEN | 39.00 |
| 6172 | BIRCHWOOD 1" SPACER 4500-4 HOLE | 39.00 |
| 6173 | BIRCHWOOD 1" SPACER ROCHESTER Q-JET | 39.00 |
| 6110 | ALLEN HEAD CARB.STUD KIT 1.5" | 7.00 |
| 6120 | ALLEN HEAD CARB.STUD KIT 2" | 7.00 |
| 6125 | ALLEN HEAD CARB.STUD KIT 2.5" | 8.00 |
 | ||
Fuel Pressure Guage | ||
| All gauges are 1.5” in diameter, chrome plated stainless steel, shock resistant, and can also be mounted on AED Fuel Lines. Gauges feature an 1/8” NPT male fitting | ||
| 6100 | FUEL PRESSURE GUAGE 0-15 | 19.00 |
| 6101 | FUEL PRESSURE GAUGE 0-15 (Liquid Filled) | 27.00 |
| 6102 | FUEL PRESSURE GAUGE 0-30 | 19.00 |
| 6103 | FUEL PRESSURE GAUGE 0-30 (Liquid Filled) | 27.00 |
 | ||
Jet Boxes | ||
| 6000 | Jet Box with 64-81 2 each | 59.00 |
| 6010 | Jet Box with 82-99 2 each | 59.00 |
 | ||
| 6109 | Small Part Kit 300 pic | 119.00 |
 | ||
| 6052 | Track Kit | 55.00 |
 | ||
Fuel Logs | ||
| fuel logs are perfect for splitting the main fuel line to the regulators and keeping high pressure fuel on tap to the carburetors. This additional plenum chamber greatly reduces fuel system load and float drop. The AED fuel log is made of high quality black anodized aluminum with a 3/8 NPT inlet, 2 welded 3/8 pipe nipple outlets | ||
| 6250 | PRO FUEL LOG 2 OUTLET (4150 Carburetor) | 79.00 |
| 6251 | PRO FUEL LOG 2 OUTLET (Dominator) | 79.00 |
 | ||
| 5895 | Rear Stainless Jet extensions | 16.00 |
| 5896 | Machined Float with Stainless Jet extensions | 34.00 |
 | ||
| 7200 | PRO TUNNEL RAM LINKAGE 440-MOPAR Heim Joints | 149.00 |
| 7250 | PRO TUNNEL RAM UNIVERSAL TOP LINK Heim Joints | 119.00 |
 | ||
| 5180 | Dual throttle return spring kit | 28.00 |
 | ||
Nitrous Gauge | ||
| Our new kit features a 0-1500lb gauge that inserts into our billet AN bottle connector. You simply install the fitting on your #4 bottle outlet fitting. Monitoring bottle pressure is a must for safe & maximum nitrous performance. | ||
| 6105 | NOS BOTTLE FITTING w/ 1500lb. GAUGE (#4 line) | 45.00 |
| 6106 | NOS BOTTLE FITTING w/ 1500lb. GAUGE (#6 line) | 45.00 |
 | ||
Fuel Bowl Fittings | ||
| 5426 | FUEL FITTING 600 HOLLEY-STRT.3/8 | 8.50 |
| 5427 | FUEL FITTING 600 HOLLEY-BANJO 3/8 | 15.00 |
| 6090 | ANNODIZED #6 FUEL BOWL FITTING (pr) | 16.00 |
| 6091 | ANNODIZED #8 FUEL BOWL FITTING (pr) | 19.00 |
 | ||
| 6200 | RH.3/8-#6 FUEL FIT FOR GAUGE | 15.00 |
| 6201 | LH.3/8-#6 FUEL FIT FOR GAUGE | 15.00 |
 | ||
| 5170 | Clear View Fuel Sight Plugs | 5.00 |
 | ||
| 5565 | Complete Accelerator Pump Kit - 50cc | |
| 5570 | Complete Accelerator Pump Kit - 30cc | |
 | ||
Fuel Bowls | ||
| 5364 | PRIMARY FLOAT BOWL CENTER PIVOT | |
| 5364A | COMPLETE PRIMARY BOWL | |
| 5365 | SEC.FLOAT BOWL DOUBLE PUMPER | |
| 5365A | COMPLETE SEC. BOWL (DP) | |
| 5366 | SECONDARY FLOAT BOWL CENTER (3310) | |
| 5366A | COMPLETE SEC. BOWL (3310) | |
| 5367 | DOMINATOR FLOAT BOWL PRI.& SEC. | |
| 5367A | COMPLETE DOMINATOR BOWL | |
Fuel Floats | ||
| 5350 | SIDE PIVOT BRASS FLOAT(600-STYLE) | 7.50 |
| 5360 | CENTER PIVOT NITROPHYL FLOAT | 11.50 |
| 5361 | CENTER PIVOT BRASS FLOAT | 9.00 |
| 5362 | CENTER PIVOT DURACRON FLOAT | 7.00 |
| 5370 | MODIFIED FLOAT LH.SIDE DRAG | 24.00 |
| 5380 | MODIFIED FLOAT RH.SIDE DRAG | 24.00 |
| 5381 | MOD.FLOAT DRAG RACE (for Jet Ext.) | 24.00 |
 | ||
| 5580 | VAC.SECONDARY TUNING KIT / springs | |
| 5585 | QUICK CHANGE TUNING KIT / springs VAC.SEC. | |
 | ||
Metering Block Conv Kit | ||
| 6300 | METERING BLK.CONV.KIT 600-660s | 54.00 |
| 6310 | METERING BLK.CONV.KIT 3310 | 45.00 |
  | ||
Hi-Flow Needle & Seats | ||
| New 2-Piece “High Flow Gas Needle & Seat” assembly is a must have for any High HP application. Now you can maintain that constant fuel level that’s so important for consistancy & low Et’s. We didn’t just increase sizing but started with a whole new concept & a clean sheet of paper. Our 2-piece assembly is a bottom feeder flowing as much as 30% more fuel at lower float drops which is critical in maintaining optimal fuel levels. It only requires 7psi max to deliver a much cleaner non airated fuel charge. | ||
| 5116 | Hi-Flow 2 Piece Gas .120" Needle & Seat | 12.00 |
| 5116A | Hi-Flow 2 Piece Gas .130" Needle & Seat | 14.00 |
| 5116B | Hi-Flow 2 Piece Gas .140" Needle & Seat | 14.00 |
| 5118 | Hi-Flow Alcohol .130" Steel Needle & Sea | 12.00 |
 | ||
Needle And seat Assemblies | ||
| traditional .110” Viton hi-flow units designed for up to 650 HP on gas. For power levels over 650 HP with single carburetors or with marginal fuel systems we recommend our special .125” viton tipped assemblies which flow approximately 25% more fuel than the .110’s and will accept up to 7-8 pounds of fuel pressure. For alcohol applications our special .150” stainless steel needle and seats are the ultimate in fuel capacity and seating ability where optimum fuel flow is required. These special hi-flow needle and seats will not accept the standard 7-8 psi at idle like conventional needle and seats. | ||
| 5110 | NEEDLE & SEAT ASSEM. .110"PAIR | 12.50 |
| 5115 | HI-FLOW .125"VITON NEEDLE & SEAT | 9.50 |
| 5117 | HI-FLOW .150 ALCOHOL NEEDLE & SEAT | 12.50 |
| 5118 | HI-FLOW .130 ALCOHOL NEEDLE & SEAT | 12.00 |
| 5120 | HARDWARE KIT NEEDLE & SEAT PR. | 6.50 |
| 5123 | NYLON REUSABLE NEEDLE & SEAT GSKTS. 2 PR | 6.50 |
 | ||
Hardware Kit | ||
| all bowl screws, pump screws, pump cover screws, throttle plate screws, needle nuts and screws, baseplate and idle mixture, idle speed screw and spring, sight plug and misc clips | ||
| 5150 | 4150 Double Pumper Hardware Kit | 29.00 |
| 5160 | 4160 Vac Sec. Hardware Kit | 29.00 |
 | ||
Holly Performance Stock Metering Blocks | ||
| 6550 | 650-850 Primary Metering Blocks | 45.00 |
| 6560 | 650-850 Secondary Metering Blocks | 45.00 |
| 6570 | Dominator 3-circuit Metering Blocks | 79.00 |
 | ||
Accelerator Pump Shooters | ||
| 5431 | ACC.PUMP SQUIRTERS STD.(.031)PR. | 11.00 |
| 5435 | ACC.PUMP SQUIRTERS STD.(.035)PR. | 11.00 |
| 5437 | ACC.PUMP SQUIRTERS STD.(.037)PR. | 11.00 |
| 5442 | ACC.PUMP SQUIRTERS STD.(.042)PR. | 11.00 |
| 5531 | ACC.PUMP SQUIRTERS-TUBE(.031)PR. | 14.50 |
| 5535 | ACC.PUMP SQUIRTERS-TUBE(.035)PR. | 14.50 |
| 5537 | ACC.PUMP SQUIRTERS-TUBE(.037)PR. | 14.50 |
| 5542 | ACC.PUMP SQUIRTERS-TUBE(.042)PR. | 14.50 |
| 5550 | HI-FLOW ACC.PUMP NOZZLE SCREW | 9.00 |
 | ||
Accelerator Pump Cam Assortment | ||
| 5560 | ACCELERATOR PUMP CAM ASSORTMENT | 17.95 |
 | ||
Vacuum Cap Kit | ||
| 5420 | Vacuum tube plug kit | 5.00 |
 | ||
Power Valves & Plug | ||
| 5025 | POWER VALVE 2.5" | 7.00 |
| 5035 | POWER VALVE 3.5" | 7.00 |
| 5045 | POWER VALVE 4.5" | 7.00 |
| 5055 | POWER VALVE 5.5" | 7.00 |
| 5065 | POWER VALVE 6.5" | 7.00 |
| 5085 | POWER VALVE 8.5" | 7.00 |
| 5025A | POWER VALVE 2.5" ALCOHOL | 11.00 |
| 5065A | POWER VALVE 6.5" ALCOHOL | 11.00 |
| 5086 | POWER VALVE BLOCK-OFF PLUG | 4.00 |
 | ||
Bowl and Metering Gaskets | ||
| 5827 | METERING BLK.GSKTS.(HOL.108-27)10PK. | 13.50 |
| 5829 | METERING BLK.GSKTS.(HOL.108-29)10PK. | 16.50 |
| 5830 | METERING BLK.GSKTS.(HOL.108-30)10PK. | 16.50 |
| 5831 | METERING BLK.GSKTS.(HOL.108-31)10PK. | 16.50 |
| 5832 | HOLLEY BOWL GSKTS.(HOL.108-32)10PK. | 16.50 |
| 5833 | HOLLEY BOWL GSKTS.(HOL.108-33)10PK. | 16.50 |
| 5836 | METERING BLK. Dominator (HOL.108-36)10PK. | 18.95 |
 | ||
Non-Stick Bowl and Metering Gaskets | ||
| 5840 | Non-Stick METERING GSKT. (108-29) 5PK 4150-4160 | 13.50 |
| 5846 | Non-Stick DOM. METERING GSKT. (108-36) 5PK | 13.50 |
| 5847 | Non-Stick Bowl GSKT. 5PK 4150-Dominator | 13.50 |
 | ||
Reusable Bowl Screw Washers | ||
| 5410 | Reusable Bowl Screw Washers 18pc | 7.50 |
 | ||
| 5200 | Bowl Screw set with Washers 4150 | 10.00 |
| 5250 | Bowl Screw set with Washers 4160 | 10.00 |
 | ||
| 5340 | VACUUM SECONDARY DIAPHRAM | 7.50 |
 | ||
| 5335 | ACCELERATOR PUMP DIAPHRAGM 30 CC | 4.00 |
| 5337 | ACCELERATOR PUMP DIAPHRAGM 50 CC | 7.95 |
 | ||
| 5897 | BOWL VENT BAFFLES (PR) | 6.50 |
 | ||
Jet Change Gaskets | ||
| 5890 | JET CHANGE GASKET KIT (2 PK.) | 10.00 |
| 5891 | DOMINATOR JET CHANGE KIT (2PK)3-circuit | 11.00 |
| 5892 | REUSABLE JET CHANGE GASKET SET (4150) | 13.00 |
| 5893 | REUSABLE JET CHANGE GASKET SET (Dominator)3-circuit | 13.00 |
 | ||
Base Gaskets | ||
| 5850 | BASE GASKETS STD FLANGE HOL.-10 PK. | 19.00 |
| 5860 | BASE GASKETS 4500 HOLLEY-10 PK. | 21.00 |
more parts available - call for prices -
Back to Home Page | Download Catalog |Back to top | Secure Order Form