Mopar Performance Parts - Big Block Engines and Related Parts

Call: 336 752 2879
Fax: 336-752-2869

Back To Index - Contact Info - Secure Ordering

Big Block Engines and Related Parts

Also see Big Block Crate Motors & Blocks

Rear Main Bearing Seal Retainer Kit

Kit contains engine rear main seal retainer, retainer bolts and seal package.

4529732

Rear Main Bearing Seal Retainer Kit

78.50

Oil Seal Package

Includes crank seals and installation tool.

4271961

Oil Seal Package

8.95

Block Hardware Package

Includes all necessary dowels, plugs, bushings and keys, as well as core plugs, rear cam bearing plug, drive gear bushing and head dowels.

5249259

Block Hardware Package

32.50

Core Plugs

These round, press-in engine Core Plugs fit standard or Mopar race cast iron blocks.

5249708

Hemi engines-brass

24.95


	Engine teardown gasket set
	includes all gaskets needed for complete engine teardown.includes oil pan,cylinder head,valve cover,chain case cover,intake manifold and oil pump gaskets.
3690175	440 V8 engine	49.95
4452113	"RB" race engine	108.50
3690850	383 V8 engine	51.95
4452112	"B" race engine	108.50
Big Block Crankshafts forged from 1053 steel,these cranks are perfect for restoration and rebuilding "B/RB" engines.they feature diagonal cut grooves.
	"RB" Forged Race Crankshaft
5007250	"RB"-4.15" stroke,8 bolt,(balanced)-4340 steel.	1,395.00
5007251	"RB"-3.75" stroke,8 bolt, full radius, (balanced)-4340 steel.	1,395.00

	CRANK KEY PACKAGE
	contains two keys.
5249822	"B/RB"	5.00

	CRANK BOLT PACKAGE
	1.25" length typical for "B/RB" forged cranks,
	2.25" length for cast crank "B/RB".
5249557AB	2.25" bolt-heavy-duty/high performance applications.	7.95
5249562	1.25" bolt-thin damper,standard applications	15.95

	Steel SFI Approved Vibration Damper
	Steel ring,SFI approved, 6 bolt front pulley mount pattern.
5249694	Forged crank, "B" & RB engine (1962-70)	335.00

	Thin "B/RB" Crank Vibration Damper
	Designed for forged crankshafts used in "B/RB" and Hemi's.
3830183	"B/RB" crank vibration damper	235.00

	Damper Degree Timing Tape
	marked in 90 degree increments.
4529070AB	Damper degree timing tape	6.95

	OIL SLINGER
	protects front seal from excessive oil contact.forces oil into chain.
5249636	"B/RB"	6.95

	HYDRAULIC PUSHRODS
4529559	"RB" engine set of 16 (9.31")	52.50
4529545	"RB" engine,3/8" dia.overall length of 9.31" (sold individually)	7.95
4529557	"B" engine set of 16 (8.57")	52.50
	MECHANICAL PUSHRODS
4529560	"RB" engine set of 16(9.20") 1-set	109.95
4529546	"RB" engine,3/8" dia. Overall length of 9.20"(sold individually)	13.95
	MECHANICAL/HYDRAULIC PUSHRODS
	Special pushrods to use with adjustable
	rocker arms and hydraulic tappet cams.
4876392	"RB" engine set of 16	119.95
4876391	"RB" engine ( sold individually)	13.95
	RACE CUSTOM PUSHRODS
P90001	B/RB custom length pushrods for race applications .081 heat treated for high lift cams w/ double or triple valve springs	159.95

	ALL-OUT RACE CHAIN & SPROCKETS
	kit includes: magna-fluxed sprockets and roller timing chains. "B/RB"
4452815	three-bolt,standard size	109.50
	High strength double roller chains
	kit includes: magna-fluxed sprockets and roller timing chain. Has three keyways on crankshaft sprocket to adjust cam timing. "B/RB"
5249268	one-bolt mount	85.50
5249269	three bolt mount	85.50

	TIMING COVER
	package includes: cover,seal, and gasket.
4349816	chrome plated front timing cover (1968-91)	38.95

	Chrome bolt pkg. for front timing covers
4452795	"B/RB" engine	19.95

	Front cover gasket and seals
4876280	seal-front cover("B/RB") applications	9.95
4876769	"B/RB" gasket	6.95

	FORGED STEEL CONNECTING RODS
	Includes high strength bolts. Matched sets of 8 (to +or-1.5gms)
4876293	"RB" floating pin,6.76" center to center, lite forging.	760.00
4120097	Connecting Rod Bolt and Nut Set, 3/8"

	"B/RB" HYDRAULIC CAM & LIFTER PKGS
4452783	268/284dur 46o/lap 450/458lift idle-5800 rpm	169.95
4529270	268/284dur 46o/lap 450/458lift idle-5800rpm	179.95
4286675	260/260dur 34o/lap 430/430lift 1000-5300rpm	169.95
4286677	272/231dur 48o/lap 455/455lift 1300–5700rpm	169.95
4452993	280/280dur 60o/lap 474/474lift 2000/5900rpm	179.95
4120235	284/284dur 68o/lap 484/484lift 2200/5900rpm	159.95
5007697	284/284dur 56o/lap 484/484lift 2200/5900rpm	199.95
4120237	292/292dur 76o/lap 509/509lift 2600/6000rpm	159.95
5007698	292/292dur 64o/lap 509/509lift 2600/6000rpm	189.95
4529318	320/320dur 104o/lap 533/533lift 3600/6300rpm	159.00
	"B/RB" MECHANICAL CAM&LIFTER PKGS
4120659	284/284dur 60o/lap 528/528lift 2400/6600rpm	179.95
4120661	296/296dur 76o/lap 557/557lift 3000/6700rpm	189.00
4120663	312/312dur 104o/lap 590/590lift 3400/6900rpm	169.00
4349268	324/324dur 112o/lap 620/620lift 4000/7000rpm	179.00


	CAMSHAFT BEARINGS
	Includes complete engine set.
5249711	"B/RB" engine applications, babbit applications.	38.50
	Camshaft sprocket attaching hardware
6030269	"B/RB" sprocket bolt for one-bolt mounting	2.00
5007801	Camshaft Sprocket Bolt Kit, Includes 3 Bolts	29.95

	CAMSHAFT OFFSET BUSHING SET Set includes five bushings: 2°, 4°, 6°, 8° offset, and one oncenter bushing. Color guide only — check installations with dial indicator. Gold = 2°, Copper = 4°, Silver = 6°, Black = 8°.
3690936	bushing for "B/RB"	25.50

	Camshaft sprocket attaching hardware
6030269	"B/RB" sprocket bolt for one-bolt mounting	2.00
5007801	Camshaft Sprocket Bolt Kit, Includes 3 Bolts	29.95

	HYDRAULIC TAPPETS(SOLD INDIVIDUALLY)
4006767	"B/RB" engine	6.50
	MECHANICAL TAPPETS (SOLD Individually)
2843177	"B/RB" race applications.(0.0005" undersize)	7.50

	ROLLER TAPPET SETS
	Matched paie with guide bar.
4452920	"B/RB" engine-standard size	55.95

Big-Block Aluminum Complete Cylinder Head Assemblies Designed for 1961-78 Chrysler 361-440 c.i.d. Wedge engines Complete – Ready to bolt-on Distinctive “MOPAR” logo on side of head “452” Casting number on intake runner Flow 290 cfm on the intake and 217 cfm on the exhaust at .600" lift Straight spark plugs for header and exhaust manifold clearance 84cc combustion chamber .600” lift valve springs 2.14” Intake valve 1.81” Exhaust valve 210cc Intake Port Volume, 70cc Exhaust Port Volume
5153524	"452" Aluminum Complete Cylinder Head	769.00

CNC-Ported Stage VI Aluminum Cylinder Heads These unique CNC-ported heads feature special machining for longer valves, allowing for a deeper port in the critical short turn area. With port profiles developed by Chapman Racing, these exclusive heads feature state-of-the-art design for maximum flow over the entire lift curve. Available in two versions: standard port window with a 260 cc intake port, or Max Wedge with a 286 cc intake port. Both set the standard in Big Block fl ow efficiency for their respective port size. P4876383 requires the use of Rocker Shaft Stands (P5007742), 5.40" length, and 11/32" diameter valves.
4876386	CNC-Ported Stage VI Aluminum Cylinder Head 2.25" Intake, 1.81" Exhaust (Max Wedge)	2275.00
4876383	CNC-Ported Stage VI Aluminum Cylinder Head 2.18" Intake, 1.81" Exhaust	2275.00
CNC-Ported Stage VI Aluminum Cylinder Heads — Semi-Machined Casting These semifinished heads are the same castings used in P4876386 but have “As Cast” ports for custom porting. Pushrod holes are not machined for custom location with large intake ports.
5007834	Semifinished Stage VI Aluminum Cylinder Head Casting (Max Wedge) - Ideal for CNC Porting	695.00
Raised Port, Big Block Cylinder Head Raised Ports for improved fl ow. Angle plug design. Head supplied w/2.20" intake and 1.81" exhaust valves, 11/32" stem diameter, 75 cc chamber w/280 cc intake and 100 cc exhaust port volume. Requires .550" offset intake rockers. Special P/N valley trays req'd.
5153654	Cylinder Head, Raised Port, Angle Plug Big Block	TBA
Max Wedge Cast Iron Cylinder Heads Features a large port window for increased airflow, and a short side radius on the exhaust port for added fl ow. Designed to replace 1962–64 Max Wedge heads. Uses closed combustion chamber, 6-bolt valve covers, and cast-in pedestals.
5007494	Cast Iron Stage III Cylinder Head — 2.08" Intake, 1.88" Exhaust (1962–64 Max Wedge)	595.00
5249824	Cast Iron Stage III Cylinder Head — 2.14" Intake, 1.81" Exhaust (1962–64 Max Wedge)	615.00

	"B/RB" STAGE V WEDGE CAST IRON
	CYLINDER HEADS(BARE MACHINED)
	SOLD INDIVIDUALLY
4529993	stage V for 2.14 intake and 1.81 exhaust	468.00
Stage VI Aluminum Big Port Cylinder Heads Designed and developed by Mopar, these lightweight cylinder heads are made from high-strength aluminum and are designed to be interchangeable with stock Big Block cylinder heads (40 lbs. lighter per engine set). Features larger intake ports that are rectangular and raised for increased output (210 cc), and raised exhaust ports. Maintains stock header pattern and a closed combustion chamber of 78 cc with a thick 0.450" deck that permits milling. These bare machined heads use stock valve gear and include seats and bronze 3/8" guides. All Mopar aluminum heads are quality checked for pressure and hardness. Aluminum Max Wedge heads require offset intake rockers. P5249579 features small closed chamber and relocated spark plug.
4529335	Stage VI Aluminum Cylinder Head — 2.14" Intake, 1.81" Exhaust	825.00
5249579	Stage VI Aluminum Cylinder Head — 2.14" Intake, 1.81" Exhaust (Big Port / Max Wedge)	675.00


	Composition material head gaskets
	thick,0.040" to 0.042" that can be used for
	replacement or competition applications up
	to 12.5:1 compression ratio.(sold as a set)
4876070	"B/RB"-big bore over 4.380" bore	199.95
4529455	"B/RB"-up to 4.42" bore,.038" thick	52.50
4349559	"B/RB"-up to 4.380" bore,.040" thick	54.95

	Steel Shim Head Gasket Sets
	0.020" compression thickness(sold as sets)
4286754	"B/RB" engine	18.95

	HEAD BOLT SETS
	includes all head bolts for both heads
4120472	"B/RB" engine	42.50
Porting Templates Die cut clear templates take the guesswork out of porting a set of heads. Use to increase intake and exhaust airfl ow as well as torque and horsepower.
4120437	Porting Template — 2.08"/1.74" Valve Size, Cast Iron Head (Big Block Production Heads)	15.95

	VALVE COVERS AND HARDWARE
	Chrome valve cover set includes valve cover and grommets. Does not include screws or gaskets.
5007448	"B/RB" engine	169.00
5007458	chrome screws	28.50
4120101	gaskets	29.95
Direct Connection Chrome Steel Valve Covers Direct Connection chrome valve covers for small and big-block Mopar engines. These covers are just like the originals from the 1970’s and are chrome plated with baffles and grommets. The Direct Connection valve covers will add that perfect retro touch for any 318, 340, 360 along with 383, 400 and 440 engines. FEATURES/BENEFITS - Stamped from brand new tooling to ensure superior valve cover sealing - High luster chrome finish with vintage “Direct Connection” logo - Package includes two chrome valve covers with built in baffles and rubber grommets
P4349633AB	Big-Block (361,383,400, 413,426W, 440) Valve Cover Package	$57.50

MP-BBCVC	"B/RB" Big block Chrome valve covers with grommets.	29.95

	"B/RB" cast aluminum black wrinkle
	set includes 2 valve covers,oil filler caps Does not include gaskets or retaining screws
5007614	"B/RB" engine	110.50
	"AS CAST" aluminum valve covers
	set includes 2 valve covers, oil filler caps Does not include gaskets or retaining screws
5007615	"As Cast" "B/RB" engines.	99.95

	Polished cast aluminum
	set includes 2 valve covers,oil filler caps Does not include gaskets or retaining screws
5007616	"B/RB" engine	139.95
High-Performance PCV Valve For V-8 owners with four-barrel carburetors, Mopar now offers high-performance PCV valves. They look just like the originals, but feature a free-flow design to help performance V-8s breathe easier. Sold individually
4343581	High-Performance PCV Valve (V8 Four-Barrel)	TBA
Baffle and Screw Package For cast aluminum valve covers only.
5007052	Baffle and screw package	6.50
Valve Cover Retaining Screw Set Includes 12 black retaining screws. For cast aluminum valve covers only.
5007053	valve cover retaining screw set for "B/RB" engines.	15.95

	VALVE COVER ACCESSORY SET
4120272	Comprised of 12 chrome plated screw and washer assemblies. 1 chrome plated oil filler cap and 2 rubber grommets.	14.95
5007419	Chrome valve cover grommet set	6.95
4349620	Chrome hold down washers for valve covers. 12 pcs.	7.50
	VALVE COVER BOLT KIT
5007458	"A/B/RB" valve cover bolt kit- comprised of 12 chrome plated screws.	28.50

	VALVE COVER STUD KIT
P7000	"A/B/RB" valve covers, 12 stainless	9.95
	studs, washers and nuts.
Cast Aluminum Valve Cover Grommet Set Includes two grommets. For cast aluminum valve covers only.
5007921	Die-Cast Valve Cover Grommet Set	7.95

	CHROME BREATHER CAP
4529880	Bottom vented for use w/ all mopar performance parts cast aluminum valve covers,(black, polished,or as-cast) twist-on.	6.95
4529881	push-in style breather cap to fill any extra valve cover holes in mopar performance parts cast aluminum valve covers. Use with grommet(P4529882)	6.95
4529882	Rubber grommet to install (P4529881) push-in breather cap.	4.95

	Valve cover gasket set (1 pair)
4120101	All "B" and "RB" engines	29.95
4452091	Race-"B" and "RB" engines	18.95
	Valve cover grommet set-V8
5249642	valve cover grommet set (1PCV-type grommet-V8;1 plug/breather grommet)
	"A","B","RB"	6.95

	BIG BLOCK VALVES(sold individually)
5249199	int.2.08dia.4.86 length stainless 1s groove	14.95
5249200	int/2.14dia. 4.86 length stainless 1s groove	16.95
5249866	int/2.18dia. 4.86 length stainless 1s groove	15.95
4876396	int/2.20dia.4.86 length stainless 1s groove	10.95
5249201	exh/1.74dia. 4.87 length stainless 1s groove	14.95
5249202	exh/1.81dia. 4.87length stainless 1sgroove	16.95
4876398	exh/1.88dia. 4.87 length stainless 1s groove	15.95

	VALVE SEALS (VITON)
4120492	16 pcs. Per pack 3/8" stem size "B/RB"
	engine	14.95

	VALVE STEM LASH CAPS
	sold in sets of 16 pieces, .080" thick
4120626	3/8" stem	78.50

	VALVE GUIDES
	Designed for aluminum heads,made of silicon
	bronze alloy, ( sold individually)
5249672	stage VI -"B" 3/8" basic valve stem,
	intake & exhaust.	14.95

	VALVE KEEPERS(LOCKS)
4120618	3/8" stem 8degree single groove 16 pcs	38.50
4286612	3/8" stem 10 degree single groove 16 pcs	48.95

	"B/RB" VALVE SPRINGS (EACH)
4286812	single/damper 430/460lift chrome-van	9.50
3690933	single/damper 440/500lift chrome-van	7.50
5249848	single/damper 480/540lift chrome-sil	9.95
2806077	dual/damper 500/610lift chrome-van	6.95
4876064	dual/damper 590/640lift chrome-sil	11.95
2946353	dual/damper 520/700lift special	9.25
5249849	dual/damper 650/750lift chrome-sil	10.00
4007536	triple 640/745lift chrome-sil	18.95


	"BRB" ENGINE RETAINERS
4452033	chrome-moly 8, 3/8" valve stem size single	6.95
4007178	titanium 8 dual	17.95
4120785	titanium 10 dual	34.50
4286775	titanium 10 triple increase .060"	19.50


	ROCKER SHAFTS
4529101	Hydraulic valve gear,non-chrome,all "B" heads,
	all int-exh,on-center. 1 piece	54.00
5249092	alum.rollers valve gear,chrome,all "B" heads,
	on-center. Set of 2	98.50

	ROCKER SHAFT END PLUGS
	Fits "B/RB" engines. Does NOT fit after-
	market rocker shafts.
5249633	set of four	6.95

	ROCKER SHAFT HOLD DOWN
	Billet aluminum rocker shaft hold down for
	greater rocker shaft stiffness.anodized blue.
5249714	"B/RB" engine	97.50

	Rocker Shaft Retainers and Bolts
	Each kit contains previously hard to find
	hold down retainers and bolts necessary
	to secure both rocker shafts. For use on all
	cylinder heads with cast-in rocker stands.
4529744	"B/RB" engine	29.95

	Max Wedge Rocker Shaft Stands
	HD billet aluminum CNC machined, designed for max wedge stage I,II, and P4529996 heads. Uses standard rocker shafts and rocker arms.
5007217	Max Wedge I,II,and P4529996	169.95
5007742	Rocker Shaft Stand (Stage VI CNC Ported Heads P4876383, P4876386)	149.95
	B/RB' ROCKER SHAFT SPRINGS
	for use with mechanical rocker arms. Pkg.
	includes one engine set.( 8 springs)
4452801	"B/RB" engine	31.50
	Hydraulic Rocker Arm Packages
	feature thicker cross-sectional material in
	pushrod socket area for added durability.
	includes 16 heavy-duty hydraulic rocker arms
	includes rocker shaft retainers,and holddown
	bolts. Rocker shafts NOT included.
4529743	"B/RB" engine,hydraulic,1.5 ratio	82.50
	service hydraulic rockers
	sold individually
4529476	"B/RB" engine,1.5 ratio,right	10.95
4529477	"B/RB" engine,1.5 ratio,left	10.95

	Cast Iron/Ductile Mechanical rocker arm Pkg.
	includes 16 rocker arms,adjusting screws and lock nuts,mech. Lash adjustment w/ lock nut. High strength cast iron/ductile iron rocker arms. Required w/ mech. Cams, can be used w/hydraulic cams. Rocker Shafts NOT included.
4120974	"B/RB",1.5 ratio, includes 8 separator springs(includes max wedge)	325.00

	Rocker Arm Adjusting screw & nut set
5007444AB	screws and nuts (8 each)-requires 2 sets
	for V8 engine	26.95
Rocker Shim Package Use to improve adjustable rocker arm-to-valve tip alignment. 0.015" thick. 12 per set.
3690896	Rocker Arm Spacer Set	10.95
	INTAKE MANIFOLDS

MAX WEDGE CROSS RAM INTAKE MANIFOLD Fits all RB engines (413, 426W, 440) equipped with production Max Wedge Cylinder Heads Patterned from the 1964 "Stage III" production intake manifold Cast from 356T Aluminum and is heat treated prior to machining Cast with the 1964 production number "2402726" along with the original "DPCD" logo CNC machined to the original Mopar blueprint specifications Designed to accept factory or aftermarket AFB style carburetors Maintains production height dimensions for adequate hood clearance with factory style air cleaners or air horns.
5007330	Max Wedge Cross Ram Intake	1360.00
5153567	Max Wedge Linkage Kit	335.00
5153338	Max Wedge Bolt/Plug Kit	149.95
	Intake Manifold Service Gaskets
5007334	Cross-Ram	10.95

	RACE V8 SINGLE PLANE-4 BBL
5249358	std.4 bbl, alum.single plane, large rec. port,
	stage VI, "RB" full width	195.50
4876127	4500 carb,aluminum,single plane,rectangle
	large port,stage VI, "RB" full width	189.95
4876128	std.4 bbl aluminum,single plane,Max Wedge
	MW stage VI, "RB" full width	189.95
4876129	4500 carb,aluminum,single plane,Max Wedge
	MW stage VI, "RB" full width	189.95

	V8 Dual Planes-4bbl
4529117	4 bbl carb,aluminum,dual plane,rectangle
	port,"B" prod."B" (383) stage IV,V	210.50
413/426Wedge/440 Aluminum Intake Manifold Designed for 413-426-440 c.i.d. Distinctive “Mopar” and “Wedge” logo on intake runners Dual-plane design results in excellent low-rpm torque and outstanding high-rpm hp. increase air flow over existing dual plane units from 2500 to 6500 rpm. For high-performance street/strip applications. Will not fit 1962-64 Max Wedge heads. Port exit dimensions: 1.13" x 2.09" Manifold measure 8.75" across block 650 – 800CFM carburetor Use with Mopar Aluminum Cylinder Heads P5153524
5153525	Dual-plane Aluminum Intake	215.00

	V8 DUAL PLANES-6 BBL
4529055	6 bbl carb,aluminum,dual plane rectangle
	port,all "B" prod.stage IV,V,"B" (383)	369.95
4529056	6 bbl carb,aluminum,dual plane rectangle
	port,all "RB" prod.stage IV,V "RB" (440)	410.50

	V8 SINGLE PLANE-4 BBL
4529462	4 bbl carb,aluminum,single plane,rectangle
	port,"B" prod.stage IV,V "B" (383)	210.00
4529463	4 bbl carb,aluminum,single plane,rectangle
	port,"RB"prod.stage IV,V "RB"(440)	210.00
4529724	4500 carb,aluminum,single plane,rectangle
	port,"B" prod. Stage IV,V "B" (383)	210.00
4529725	4500 carb,aluminum,single plane,rectangle
	port,"RB" prod.stage IV,V "RB" (440)	235.00

	MANIFOLD GASKETS
	Kit comes complete to service one engine
	set includes: gaskets,end seals,o-rings, and
	distributor seal where applicable.
5249433	"RB" stage VI-0.030" thick	13.95
5249467	"RB" stage VI-0.045" thick	14.50
5249468	"RB" stage VI-0.060" thick	14.50
5249483	Max Wedge stage VI-0.030" thick	11.95
5249484	Max Wedge stage VI-0.045" thick	13.95
5249485	Max Wedge stage VI-0.060" thick	13.95

	Intake gasket heat block-off
	stainless steel heat block-off plate and intake gasket blocks exhaust heat from transferring to the intake manifold for a cooler,denser, fuel-air mixture.
4286825	"B" engine	18.95
4286826	"RB" engine	26.95
4452103	Race Intake Manifold Gaskets (361/383/400 with Stage IV, V, or Production Heads)	22.50
4452105	Race Intake Manifold Gaskets (413/426W/440 with Stage IV, V, or Production Heads)	23.50

	Big Block Intake Manifold reinforcement
	the hard to find "B" and "RB" engine intake manifold gasket reinforcement bar that holds down the intake manifold gasket at the front and back of the block.
5249492	"B" engine intake manifold gasket reinforcement.	41.50
5249493	"RB" engine intake manifold reinforcement	32.50
	Max Wedge Composite Intake gasket set
	for large port Max Wedge heads originally built in 1962-64 as 413/426 engines., package includes 2 gaskets and 2 end seals.
5249643	Max Wedge intake gasket set	14.50

	Max Wedge Manifold Plug Package
	consists of 8 manifold plugs. Used in max
	wedge cross ram manifolds.
5249926	Manifold plug package	265.00

	STAGE VI 440 Intake Manifold Spacers
	package contains 2 cast aluminum
	manifold spacers.
5249189	stage VI intake spacer package	139.95

	B/RB' engine choke seal for dual plane
	production and aluminum intake manifolds.
	Package includes the choke cup,gasket and
	two screws. Does not include a choke.
5249639	"B/RB"	21.50
	V8 INTAKE MANIFOLD ATTACHING KITS
	A complete package of bolts (screws)
	required to attach the intake manifold to the
	cylinder heads.
4876770	"B/RB" engine (383 & 440)	6.95

	Milodon Low Profile Oil Pan
MD30930	383-440, 7 quart - 7inch Sump Depth	189.95

	Milodon Oil Pickup
MD18325	383-440 3/8 stock pipe Inlet	35.95
MD18335	383-440, Hemi 1/2 opened pipe Inlet	35.95

MP- 8QTBB	Big block 8qt oil pan / pickup package choice of 3/8" or 1/2" pickup tubes.	129.00

	OIL PAN PACKAGES
	Each kit contains a factory engineered and
	approved oil pan
5007807AB	383/400/440 center sump	149.95
5249064	383/400/440 rear sump	89.95

5007816	Oil Pan--8-quart center sump	175.50
	CHROME DIPSTICKS
4349629	"B/RB" engine	15.95
	OIL PAN BOLT SETS
4120613	"B/RB engine	9.95

	OIL PAN GASKETS
3412049	"B/RB"(requires two for windage tray applications)	9.25
4452099	"B/RB"-race includes 2 gaskets	11.50

	OIL PICKUP AND SCREEN ASSEMBLIES
	standard pick ups are 3/8" while race styles require hole enlargement in stock blocks.
4529564	"B" engine-1968-72	23.95
5249817	"B" engine-1/2" pipe	56.50
4529565	"RB" engine-1968-72	23.95
5249818	"RB" engine-1/2" pipe-siamesed bore blocks(except raised cam blocks)	62.50
5007817	Oil Pickup Assembly 8-Quart, 3/8" Pipe, for Oil Pan P5007816
5007818	Oil Pickup Assembly 8-Quart, 1/2" Pipe, for Oil Pan P5007816	45.00
5007848	Oil Pickup and Screen Assembly — 6-Quart, 3/8" Pipe, Use with Oil Pan P5007807AB	13.95

	High pressure relief spring
4286571	"B/RB" engine	3.95

	VALLEY TRAYS
	for use with stage VI heads to keep the engine oil tappet chamber off the intake manifold.designed for use on low deck :B" engines.but may be used on "RB" engines by using manifold spacers such as P4529147.
4876847	"B" valley tray	46.95
4876848	"RB" valley tray	46.95
5153821	Valley Tray (“B” Engines with Raised Port P5153654 Heads)	39.95
5153822	Valley Tray (“RB” Engines with Raised Port P5153654 Heads)	39.95

	WINDAGE TRAYS
4120998	"B/RB"-383/400.440 (includes tray and 2
	pan gaskets)-3.75" stroke	24.95
5007345	"B/RB"-4.15" stroker-500 CI Wedge w/tray
	and 2 pan gaskets.	39.95

	HIGH PERFORMANCE OIL PUMPS
	This high performance ,high out-put oil pump assembly provides a 25 % increase in oil volume. Ideal replacement for stock pump in high performance applications.
4286590	All "B/RB" engines	85.95

	HIGH VOLUME OIL PUMP BOLT PKG.
P70018	s/steel bolt pkg.for high volume oil pump	9.95
	DIST/OIL PUMP DRIVESHAFT GEAR
	ASSEMBLY WITH HARDENED TIP
	Features haredned tip shaft with full radius
	blend from hex to round and pinned gears.
3412064	Extra length for use with milodon oil system	68.00
3571071	For use with flat tappet cams(non-roller)	64.50
3690875	For use with roller tappet cams-aluminum
	bronze gear	119.50
3690876	For use with roller tappet cams and milodon
	oil system-aluminum bronze gear(extra
	length).	86.50
High-Performance Oil Filter Engineered to meet the demands of heavy-duty and high-performance applications. Filter is black with Mopar Performance Pentastar logo.
4452890	HP oil filter-black finish-Hemi	7.50
Race Oil Filter High-performance, heavy-duty oil filter has a thicker canister with high burst strength. Filter is black with Mopar Pentastar logo.
4529190	Race Oil Filter — Black Finish	23.50

	RESTORATION OIL FILTERS
4529805	Restoration Oil Filter, High-Performance, Red/White/Blue	16.95
4529187	Restoration Oil Filter, Red/White/Blue	17.95
4529806	Restoration Oil Filter, Black with Yellow Mopar Logo (1962-66 V8)	16.95

	OIL PUMP PRIMING SHAFT
	Special hardened steel priming shaft fits on
	any 3/8" or larger drill.pressurizes oil galleys
	to ensure against dry starts and ruining your
	engine. Fits all V8's.
4286800	Oil pump priming shaft	6.95

	MOBIL 1 TRI-SYNTHETIC MOTOR OIL
	Sold in cases only. 6 quarts per case.
5007323	5W-30 Tri-synthetic formula	42.00
5007324	10W-30 Tri-synthetic formula	42.00
5007325	15W-50 Tri-synthetic formula	42.00
5007326	Synthetic Gear Lube	48.00

	ALUMINUM "B/RB" WATER PUMP HOUSING
	Has hoses for both early and late engine
	applications. (1968-78)
4286900	All "B/RB" engines	158.95
2206445	Bracket for alternator	14.95

	LIGHTWEIGHT ALUMINUM "B/RB" WATER PUMP
	This pump is fully assembled and ready to
	install. Same dimensions as stock cast iron
	version,except the housing is made of alum.
5007643AB	"B/RB" engines	89.95

	WATER PUMP INSTALLATION KIT
	Includes water pump gasket,pump housing
	gasket,plugs,water pump screws,plus long
	and short housing screws.
5007449	"B/RB" engines	32.50

	Attaching bolts-water pump & hsg.
5007621	"B/RB" water pump & housing bolts	28.95

	CHROME WATER NECK
	Includes gasket and 2 chrome bolts.
4286759	Through 1978-V8	14.95

	V8 THERMOSTATS
	Heavy-duty thermostats that can handle
	increased heat managementduties in high
	performance engines.each comes with gasket.
	"BIG" thermostat,P4876307 is 180 degree
	"SMALL" thermostat,P4876308 is 195 degree
	fits "B/RB"
4876307	180 degree through 1978	6.95

	90 DEGREE WATER NECK OUTLET
	cast aluminum 90 degree water neck outlet
	provides greater flexibility in routing cooling
	system hoses. Three-direction capability
	ideal for compact engine compartments.
5249191	90- degree water neck outlet	28.95

	VISCOUS FAN PACKAGE
	It provides thermostatically-controlled
	cooling,includes a lightweight balanced fan
	and takes the least amount of horsepower
	from the engine.offers up to 15 hp gain on
	typical high performance V8s.
4120758	Viscous fan package	105.00
Fan Blade This four-blade fan fi ts all 1964–65 Super Stock applications, as well as numerous LA, B/RB engines. Made from original tooling.
03462185	Fan Blade	TBA
Radiator Cooling Fan Shrouds Restoration Radiator Cooling Fan Shrouds fi t 26" wide cores only.
2785434	Restoration Radiator Cooling Fan Shroud (1967–69 426 Hemi, 383/440 Big Block B-Body) 5-stud mounting	75.00
2998326	Restoration Radiator Cooling Fan Shroud (1970–73 426 Hemi, 383/440 Big Block Band E-Bodies) 4-screw mounting shown	75.00
Radiator Cap When you open the hood, it’s right there where everyone especially the judges can see it. If your radiator cap is more than ten years old or just looks bad, replace it with this original equipment quality piece.
77R06021	Radiator Cap, 16 lb. (22" and 26" Radiator)	42.50

	Plastigauge Assortment
	this assortment includes:
	one blue strip for .004"-.009" clearances
	two red strips for .002"-.006" clearances
	two green strips for .001"-.003" clearances
	each strip is 12" long.
4286819	Plastigauge assortments	6.95

	DEGREE WHEEL
	aluminum-for centerlining camshafts.
	0-180-0 degrees. Features step by step
	installation instructions printed on back.
4452990	Degree Wheel	22.95

	VALVE LASH ADJUSTMENT CHART
	eight position method.
4452989	Valve Lash Chart	4.95

	TDC INDICATOR TOOL
	for determining exact top-dead-center when
	centerlining cams.made of hardened steel
	is extremely accurate and can be used on
	all chrysler V8,6 cylinders,and 2.2L engines.
4349737	TDC indicator tool	26.50

	HARDENED WASHER SET
	for use with head bolts and main caps.
4120456	3/8"-20 washers	13.95
4120459	1/2"-20 washers	6.50

	MAIN BEARINGS
P80008	standard 440 RB full groove main set	CALL
P80009	standard full groove main set tri-metal
	1974-80 400 engine	CALL
P80010	up to 1973 full groove 383/400	69.95