 |
Call: 336 752 2879 Fax: 336-752-2869 |
|---|
Restoration Parts
 Chrysler Penstar | ||
| 77R06288 | Chrysler Penstar Nameplate - RF Fender | $11.50 |
 Automatic Shift Knob Pkg. | ||
| 77R06289 | Automatic Shift Knob Pkg. 1969-70 B Body, 1970 E Body, and 1969-74 A Body | $67.95 |
 Floor Console | ||
| 77R06290 | 1967-70 B Body Floor Console - Automatic | $329.00 |
| 77R06291 | 1967-70 B Body Floor Console - Four-Speed | $329.00 |
 PCV Valve | ||
| 77R06293 | PCV Valve - Three Rib Style, fits 1970-71 Hemi and 440-6 | $24.95 |
 PCV Valve | ||
| 77R06294 | PCV Valve - Steel 90 degree style, fits 1963-69 V8 Applications | $31.00 |
 Vapor Separator | ||
| 77R06295 | Vapor Separator (Fuel Fillter), Fits 1970-71 440 and 426 Hemi | $69.00 |
 Air Cleaner Breather Hose | ||
| 77R06312 | Air Cleaner Breather Hose, inc. clamps,Fits all 1966-71 V8 Applications | $24.00 |
 Windshield Washer ReservoirWhen judges look under the hood, a sparkling clean windshield washer reservoir really stands out. If yours is yellow or cracked, don’t clean it. Instead, replace it with a brand-new one from Mopar. Exact reproduction; uses production hardware. | ||
| 02889803 | Windshield Washer Reservoir (1967–70 B-Body) | 34.50 |
| 02983067 | Windshield Washer Reservoir (1970–75 A-Body, Duster, Dart, Demon, Swinger, Valiant) | 40.50 |
| 03431074 | Windshield Washer Reservoir (1970–71 E-Body, 1971 B-Body) | 42.50 |
| 03431154 | Windshield Washer Reservoir (1970–73 C-Body) | 42.50 |
| 03431590 | Windshield Washer Reservoir (1972–74 B- and E-Body) | 52.50 |
| P2497502 | Restoration Washer Bottle Reservoir (1968–69 A-Body w/2-speed wipers) | 36.50 |
 Battery Tray | ||
| P2925322 | fits 70-74 E body and 71 up B body | 54.50 |
 Battery Hold-Down HardwareYour Battery Hold-Down Hardware is old and rusty. You could try and paint it, but that would subtract valuable judging points at the local show ’n shine. Mopar now carries brand-new original equipment-style hardware, so you don’t have to spend time searching when you can be enjoying more time behind the wheel. | ||
| P3151736 | Battery Hold-Down Nut — Fits all A-, B-, E-body, 1962–1974. | 5.95 |
| P3583020 | Battery Hold-Down Nut | TBA |
| P2534814 | Battery Hold-Down Stud — Long Outer | 6.95 |
 Battery Hold-Down Strap | ||
| 03404404 | Battery Hold-Down Strap (1970-76 A-Body, 1970-73 B-Body and 1970-74 E-Body) | 11.50 |
| 01828352 | Battery Hold-Down Strap (1963-69 A-Body, 1964-69 B-Body and 1968-73 C-Body) | 24.50 |
| P3583020 | Battery Hold-Down Strap (1971-72 B-Body) | TBA |
 Positive/Negative Battery CablesNothing is more embarrassing than having your muscle car not start and having to ask your buddy for a jump at the end of a cruise night. More often than not it’s the fact you forgot to replace those worn out and corroded battery cables. Make sure to use original Mopar replacement battery cables when working on your car's electrical system. | ||
| 02983649 | Positive Battery Cable 1971-72 B-Body with 383, 400, 440 engine 1970-71 E-Body with 383, 440 engine | 17.50 |
| 03764166 | Positive Battery Cable 1972 B-Body, E-Body with 318, 340 engine | 21.50 |
| 02983778 | Negative Battery Cable 1970-72 B-Body, E-Body with 318, 340, 383, 400, 440 Engine 1970-72 A-Body with 318, 340 Engine | 15.95 |
 | ||
340 Exhaust Manifold Heat Shield | ||
| 2946105 | 340 Exhaust Manifold Heat Shield — Driver’s Side. Fits 1968–70 340 Applications with HP Exhaust Manifolds | 178.50 |
|
Fan BladeThis four-blade fan fi ts all 1964–65 Super Stock applications, as well as numerous LA, B/RB engines. Made from original tooling. | ||
| 03462185 | Fan Blade | TBA |
|
High-Performance PCV ValveFor V-8 owners with four-barrel carburetors, Mopar now offers high-performance PCV valves. They look just like the originals, but feature a free-flow design to help performance V-8s breathe easier. Sold individually | ||
| P4343581 | High-Performance PCV Valve (V8 Four-Barrel) | TBA |
 Restoration Oil FiltersMopar has reissued these service replacement oil filters, used in the 1960s and 1970s. The white filter was used from the 1960's throughout the 70's. The high-performance white filter (P4529805) was recommended for use in competition from 1965 to 1974. The black filter was used from the late 1950's through the early 60's. These filters may not fit some V8 applications (those after 1972 requiring short filters). | ||
| RESTORATION OIL FILTERS | ||
| P4529805 | Restoration Oil Filter, High-Performance, Red/White/Blue | 16.95 |
| P4529187 | Restoration Oil Filter, Red/White/Blue | 17.95 |
| P4529806 | Restoration Oil Filter, Black with Yellow Mopar Logo (1962-66 V8) | 16.95 |
 | ||
Air Cleaner Wing NutJudges notice everything, right down to the wing nut on your air cleaner. This exact factory reproduction guarantees you won’t lose valuable judging points the next time you’re at the Mopar Nationals. Sold individually. | ||
| 4532033 | Air Cleaner Wing Nut (V8) | TBA |
Radiator Cooling Fan ShroudsRestoration Radiator Cooling Fan Shrouds fit 26" wide cores only. | ||
| P2785434 | Restoration Radiator Cooling Fan Shroud (1967–69 426 Hemi, 383/440 Big Block B-Body) 5-stud mounting | 75.00 |
| P2998326 | Restoration Radiator Cooling Fan Shroud (1970–73 426 Hemi, 383/440 Big Block Band E-Bodies) 4-screw mounting shown | 75.00 |
 | ||
Engine Paint | ||
| P4120751AB | Race Hemi Orange Engine Paint (1964–65 Race Hemi, 1962–64 Max Wedge) | 8.50 |
| P4120752AB | Turquoise Engine Paint (1962–71 Big Block except High Performance, 1969–71 383/440 Big Block) | 8.50 |
| P4120753AB | Black Engine Paint (1981–93 2.2L and 1983–2000 318/360 Small Block) | 8.50 |
| P4349216AB | Street Hemi Orange Engine Paint (1966–71 Hemi, 1970–71 HP 340/383/440) | 8.50 |
| P4349217AB | Blue Engine Paint (All 1972–83 Engines except 2.2L and 1964–69 318) | 8.50 |
| P4349218AB | Red Engine Paint (1964–69 273, 1968–69 340, 1964–69 360 Small Block) | 8.50 |
| P5007733 | Hemi Restoration Orange Engine Paint (1966– 71 Street Hemi, 1969–1971 340/383/440) | 8.50 |
Engine Paint — Quarts | ||
| P5153841 | Race Hemi Orange Engine Paint (1964–65 Race Hemi, 1962–64 Max Wedge) | 12.95 |
| P5153842 | Street Hemi Orange Engine Paint (1966–71 Hemi, 1970–71 hp 340/383/440) | 12.95 |
Radiator CapWhen you open the hood, it’s right there where everyone especially the judges can see it. If your radiator cap is more than ten years old or just looks bad, replace it with this original equipment quality piece. | ||
| 77R06021 | Radiator Cap, 16 lb. (22" and 26" Radiator) | 42.50 |
 Turn Signal Switch AssemblyWhy pay good money at a swap meet for an old, used turn signal switch assembly, when Mopar offers brand-new units for the same price? This high-quality assembly is an exact reproduction. It installs easily with no modifications necessary. | ||
| 04293102 | Turn Signal Switch Assembly (1970-76 A-, B-, E-Bodies) | 77.50 |
 Restoration Ignition CoilFor you purists out there, Mopar offers this restoration ignition coil. An exact reproduction of the original factory black unit, right down to the vintage Mopar logo. If your coil is over ten years old, replace it with this brand-new piece. | ||
| 02495531 | Restoration Ignition Coil — Black with Vintage Mopar Logo (1972–78 Small-Block, Big-Block and Hemi) | 42.50 |
 Restoration Dual Ballast ResistorThe sharpest eyes will spot the correct ballast resistor on a restoration project. This Mopar Ballast Resistor is a reissued factory original, as used on 1972 and later OEM electronic ignitions with 4-pin dual ballast resistors. | ||
| 4529795 | Resto Dual Ballast Resistor | 6.95 |
 Ignition SwitchIf your ignition switch needs replacing, don’t install an old, used piece. Replace it with a brand-new unit from Mopar. This ignition switch is an exact reproduction, and it installs perfectly with no modifications necessary. | ||
| 03747092 | Ignition Switch (1970-74 E-Body, 1970-76 A-Body and 1970-74 B- & C-Body) | 95.50 |
 Speedometer CableWhen restoring your classic, why reinstall a speedometer cable that’s 30-plus years old, when you can install a brand-new part from Mopar? This original equipment-quality cable will provide years of trouble-free operation and is easy to install. | ||
| 04897646AA | Speedometer Cable (A-, B- and E-Bodies) | 35.50 |
 Transmission Neutral Safety Switch | ||
| 5007747 | Neutral Safety Switch — 3-Prong (1985–Present A-727/A-904) | 8.95 |
| 2932820 | Neutral Safety Switch — Fits 1969 and up A-727 and A-904 | 9.95 |
 O.E. Date Coded Voltage Regulator-For use on 1970-71 applications-Painted black with original Chrysler Logo -Two date codes available (77R06285 - "321") or (77R06286 - "419") | ||
| 77R06285 | O.E.Voltage Regulator "321" Date Code | |
| 77R06286 | O.E.Voltage Regulator "419" Date Code | |
 O.E. Muscle Car Voltage RegulatorFor restoration or repair, Mopar offers this factory reissue of the Voltage Regulator, as used on muscle cars of the early 1970s. The regulator is black, with the original Mopar part number imprinted in yellow. Contains modern electronics. | ||
| P4529794 | O.E. Muscle Car Voltage Regulator | 26.95 |
 Rocker Sill PlateUnless your classic has been hermetically sealed since it was new, your rocker sill plates are probably heavily scratched and/or damaged. These quality pieces are precise reproductions that will help make your ride look factory fresh. | ||
| 03416002 | Rocker Sill Plate - (1971–74 B-Body 2-Door) | 68.50each |
| P2879600 | Sill Plates 1970–74 Challenger/Cuda | 69.50 each |
 MOPAR LOGO RUBBER FLOOR MATS, | ||
|---|---|---|
| P5153381 | BLACK, FACTORY REPRODUCTION, PERFECT FOR ANY MOPAR MUSCLE CAR. MOST COMMONLY OVERLOOKED ITEM IN MANY INTERIOR RESTORATIONS | $120.00 |
 MOPAR LOGO RUBBER FLOOR MATS, | ||
| P5153382 | MED BLUE, FACTORY REPRODUCTION. PERFECT FOR ANY MOPAR MUSCLE CAR. MOST COMMONLY OVERLOOKED ITEM ON ANY INTERIOR RESTORATION. | $120.00 |
 MOPAR LOGO RUBBER FLOOR MATS, | ||
| P5153383 | DK GREEN, FACTORY REPRODUCTION, PERFECT FOR ANY MOPAR MUSCLE CAR. MOST COMMONLY OVERLOOKED ITEM IN MANY INTERIOR RESTORATIONS | $120.00 |
 | ||
Shifter BootIf your shifter boot is damaged, worn, or missing, we’ve got you covered. This quality reproduction looks great and uses the same materials as the original production unit. | ||
| 03467764 | Shifter Boot (1967–76 Dart, Demon, Duster) | 52.50 |
| P3467766 | Shifter Boot (1970–74 Cuda/Challenger, 1971–74 Road Runner/GTX and Charger) | 62.50 |
 | ||
Hurst Shifter MechanismWhether you’re looking to replace your classic “push-in” style handle Hurst Shifter or simply want to upgrade, Mopar has the original equipment-style piece you want. Built with all-new, high-quality components, this beauty looks just like the original and fits perfectly (no modifications required when used as a replacement). | ||
| 04019122 | Hurst Shifter (All 1970–78 4-speed Hurst with “Push-In” Style Handle) | 216.00 |
 | ||
| P5153385 | FITS NUMEROUS VEHICLE MODELS SUCH AS 68-69 CHARGER, CORONET, ROAD RUNNER GTX, DART, BARRACUDA | $189.50 |
 Cuda Front FendersThese all-steel fenders are manufactured to original equipment specifications and fit perfectly, with no drilling or modifications required. | ||
| 77R06273 | 1970 Cuda Complete Fender - LH | 649.00 |
| 77R06274 | 1970 Cuda Complete Fender - RH | 649.00 |
| 77R06275 | 1971 Cuda Complete Fender - LH | 649.00 |
| 77R06276 | 1971 Cuda Complete Fender - RH | 649.00 |
| 77R06277 | 1971 Cuda Complete Fender - LH with gills | 669.00 |
| 77R06278 | 1971 Cuda Complete Fender - RH with gills | 669.00 |
| 77R06279 | 1972-74 Cuda Complete Fender - LH | 649.00 |
| 77R06280 | 1972-74 Cuda Complete Fender - RH | 649.00 |
 Challenger Front FenderWhy spend a lot of time and money bringing old fenders back to life when you can purchase these competitively priced, brand-new parts? These all-steel fenders are manufactured to original equipment specifications and fit perfectly, with no drilling or modifications required. | ||
| P5153389 | Left Front Fender (1970–71 Dodge Challenger) | 525.00 |
| P5153390 | Right Front Fender (1970–71 Dodge Challenger) | 525.00 |
| P5153391 | Left Front Fender (1972–74 Dodge Challenger) | 525.00 |
| P5153392 | Right Front Fender (1972–74 Dodge Challenger) | 525.00 |
 OE-STYLE FULL 1/4 PANEL, LH FOR 70-71 DODGE CHALLENGER | ||
| P5153395 | HIGHLY SOUGHT AFTER PART AMONG RESTORERS, FIT AND FINISH TO ORIGINAL MOPAR SPECS | $625.00 |
 OE-STYLE FULL 1/4 PANEL, RH FOR 70-71 DODGE CHALLENGER | ||
| P5153396 | HIGHLY SOUGHT AFTER PART AMONG RESTORERS, FIT AND FINISH TO ORIGINAL MOPAR SPECS | $625.00 |
 OE-STYLE FULL 1/4 PANEL, LH FOR 72-74 DODGE CHALLENGER | ||
| P5153397 | HIGHLY SOUGHT AFTER PART AMONG RESTORERS, FIT AND FINISH TO ORIGINAL MOPAR SPECS | $625.00 |
 OE-STYLE FULL 1/4 PANEL, RH FOR 72-74 DODGE CHALLENGER | ||
| P5153398 | HIGHLY SOUGHT AFTER PART AMONG RESTORERS, FIT AND FINISH TO ORIGINAL MOPAR SPECS | $625.00 |
| P5153419 | Quarter Panel, Factory-Style —Left-Hand (1970–71 Barracuda) | 649.00 |
| P5153420 | Quarter Panel, Factory-Style —Right-Hand (1970–71 Barracuda) | 649.00 |
| P5153421 | Quarter Panel, Factory-Style —Left-Hand (1972–74 Barracuda Hardtop) | 649.00 |
| P5153422 | Quarter Panel, Factory-Style —Right-Hand (1972–74 Barracuda Hardtop) | 649.00 |
| P5153429 | Quarter Panel, Factory-Style—Left-Hand (1968 2-Door B-Body Hardtop) | 649.00 |
| P5153430 | Quarter Panel, Factory-Style—Right-Hand (1968 2-Door B-Body Hardtop) | 649.00 |
| P5153431 | Quarter Panel, Factory-Style—Left-Hand (1969 2-Door B-Body Hardtop) | 649.00 |
| P5153432 | Quarter Panel, Factory-Style—Right-Hand (1968 2-Door B-Body Hardtop) | 649.00 |
Hood Pin and Cable Kit | ||
| 4529405 | Kit includes a pair of hood pins and complete attachment hardware. Exposed hardware is chrome-plated. | 28.95 |
 Universal Underhood PadThis cut-to-fit universal pad helps to dress up your underhood appearance and protects the paint on your hood from engine heat damage. For all body styles. | ||
| 04049601 | Universal Underhood Pad (Cut-to-fit) | 99.95 |
 HOOD, 70-74 CHALLENGER R/T & RALLYE MODELS | ||
| P5153393 | RALLYE (DUAL SCOOP TYPE) | $565.00 |
 HOOD SCOOP ORNAMENT SET, CHALLENGER R/T AND RALLYE MODELS, 70-74 | ||
| P5153394 | CHALLENGER R/T (LH/RH WITH | $124.50 |
 GRILLE, 69 PLYMOUTH ROAD RUNNER | ||
| P5153427 | MADE TO OE MOPAR SPECS | $335.00 |
 GRILLE AND HEADLAMP BEZEL PACKAGE, 69 PLYMOUTH ROAD RUNNER | ||
| P5153416 | COMPLETE PACKAGE INC. GRILLE AND HEADLIGHT BEZELS FOR 69 PLYMOUTH ROAD RUNNER | $425.00 |
| 77R06149 | Grille and Headlamp Bezel Package (1970 Road Runner) | 1099.00 |
HEADLAMP BEZEL SET, 69 PLYMOUTH ROAD RUNNER | ||
| P5153417 | HEADLIGHT BEZELS ONLY FOR 69 ROAD RUNNER | $162.50 |
 ’Cuda Lower Front GrilleIf the lower front grille on your muscle car is badly scratched, distorted or cracked, replace it with this brand-new piece from Mopar. This high-quality reproduction fits perfectly and includes the turn signal light casings. It’s both durable and paintable. Get one now, at a price that can’t be beat. | ||
| 03672933 | Lower Front Grille (1972–74 ’Cuda) | 98.50 |
 Challenger Cuda' Door Handles | ||
| 3760214 | Challenger/Cuda Door Handle - Right | 77.50 each |
| 3760215 | Challenger/Cuda Door Handle - Left | 77.50 each |
 “A/B” Body Door Handles | ||
| 03454390 | Door Handle, 1968–70 B-Body, 1968–76 A-Body, Right Side | 95.00 |
| 03454391 | Door Handle, 1968–70 B-Body, 1968–76 A-Body, Left Side | 95.00 |
| P3739844 | Door Handle Gasket — for use with 03454390/03454391 | TBA |
 Chrome Remote Mirror with Hardware — Left-HandForget about paying an inflated price at a swap meet for a chrome mirror that’s scratched or pitted. This brand-new reproduction looks great and fi ts perfectly. New hardware is included. | ||
| 03695508 | Chrome Remote Mirror with Hardware — Left-Hand (1966–70 B-Body and 1968–76 A-Body) | 295.00 |
 WHEELHOUSE, OUTER, 70-74 DODGE CHALLENGER | ||
| P5153399 | CHALLENGER LH | $89.95 |
| P5153400 | CHALLENGER RH | $89.95 |
 WHEELHOUSE, OUTER 68-70 | ||
| P5153403 | DODGE CORONET AND CHARGER MODELS LH | $148.50 |
| P5153404 | DODGE CORONET AND CHARGER MODELS RH | $148.50 |
 WHEELHOUSE, OUTER 70-74 PLYMOUTH BARRACUDA | ||
| P5153423 | BARRACUDA LH | $89.95 |
| P5153424 | BARRACUDA RH | $89.95 |
 WHEELHOUSE, OUTER LH 68-70 PLYMOUTH B-BODY MODELS | ||
| P5153433 | FITS PLYMOUTH ROAD RUNNER/GTX MODELS LH | $148.50 |
| P5153434 | FITS PLYMOUTH ROAD RUNNER/GTX MODELS RH | $148.50 |
 Shaker Hood SealA whole lotta shakin’ means a lot of wear and tear to your hood seal. If your Shaker hood seal hasn’t been replaced within the last ten years, odds are you’re overdue. This reproduction offers a perfect fit and the same high quality as original. | ||
| 03418658 | Shaker Hood Seal (1970–71 ’Cuda and Challenger Shaker Hood) | 110.50 |
 FRONT VALANCE, 68-69 CHARGER | ||
| P5153407 | CHARGER | $210.50 |
 FRONT VALANCE 70 & 71 DODGE CHALLENGER | ||
| P5153388 | Challenger | 189.00 |
 FRONT VALANCE 70 & 72-74 PLYMOUTH BARRACUDA | ||
| P5153415 | BARRACUDA | $148.50 |
 REAR VALANCE FOR 70-74 CHALLENGER | ||
| P5153401 | W/O DUAL EXHAUST CUTOUTS | $225.00 |
 REAR VALANCE FOR 70-74 CHALLENGER | ||
| P5153402 | WITH DUAL EXHAUST CUTOUTS | $225.00 |
 REAR VALANCE FOR 68 CHARGER | ||
| P5153412 | CHARGER | $189.95 |
 REAR VALANCE 69-70 CHARGER | ||
| P5153413 | CHARGER | $189.95 |
 REAR VALANCE, 70-74 PLYMOUTH BARRACUDA | ||
| P5153425 | WITHOUT EXHAUST CUTOUTS | $225.00 |
 REAR VALANCE, 70-74 PLYMOUTH CUDA | ||
| P5153426 | WITH EXHAUST CUTOUTS | $225.00 |
 FRONT BUMPER, CHROME 68-69 DODGE CHARGER | ||
| P5153405 | CHARGER WITH BUMPERETTES | $349.95 |
| P5153685 | 1968–69 Road Runner/GTX Front Bumper | TBA |
 FRONT BUMPERETTES, 68-69 CHARGER | ||
| P5153406 | CHARGER (CHROME) | $46.50 |
 REAR BUMPER, CHROME 68-70 DODGE CHARGER | ||
| P5153411 | CHARGER W/ GUARDS | $349.95 |
 REAR BUMPERETTES CHROME, 68-70 DODGE CHARGER | ||
| P5153414 | CHARGER (CHROME) | $48.50 |
 REAR BUMPER, CHROME 68 PLYMOUTH B-BODY | ||
| P5153435 | FITS PLYMOUTH ROAD RUNNER/GTX MODELS | $359.00 |
 REAR BUMPER, CHROME 69 PLYMOUTH B-BODY | ||
| P5153436 | FITS PLYMOUTH ROAD RUNNER/GTX MODELS | $359.00 |
 | ||
| FRONT SIDE MARKER LENS - AMBER | ||
| P5153384 | FITS 1969 DODGE SUPER BEE, CORONET R/T, CHARGER R/T ALONG WITH PLYMOUTH ROAD RUNNER/GTX | $23.95 |
| REAR SIDE MARKER LENSE - RED | ||
| P5153386 | FITS 1969 DODGE SUPER BEE, CORONET R/T, CHARGER R/T ALONG WITH PLYMOUTH ROAD RUNNER/GTX | $23.95 |
| KIT, REFLECTOR, SIDE MARKER, | ||
| P5153387 | FITS 1969 DODGE SUPER BEE, CORONET R/T, CHARGER R/T ALONG WITH PLYMOUTH ROAD RUNNER/GTX | $59.95 |
| PARK LAMP LENS LH 68-69 DODGE CHARGER | ||
| P5153408 | 69 CHARGER | $31.50 |
| PARK LAMP LENS - LH/RH PAIR 68-69 DODGE CHARGER | ||
| P5153409 | WITH GASKETS, 68-69 CHARGER | $62.50 |
| PARK LAMP LENSE RH 68-69 CHARGER | ||
| P5153410 | CHARGER | $31.50 |
| PARK LAMP LENS — RIGHT-HAND | ||
| P5153575 | 1968–69 Plymouth B-Body | TBA |
| MARKER LENS — FRONT SIDE AMBER | ||
| 03587436 | 1972–75 B-Body, 1972–74 E-Body, 1972–76 A-Body, 1976–80 F-Body | 11.95 |
| MARKER LENS — REAR SIDE RED | ||
| 03587440 | 1972–75 B-Body, 1972–74 E-Body, 1972–76 A-Body, 1976–80 F-Body | 11.95 |
 PARK LAMP LENSE (W/GASKET) | ||
| P5153428 | 68-69 PLYMOUTH ROAD RUNNER/GTX (W/GASKET) | $53.00 |
 | ||
| 3613278 | 440 | 36.95 each |
 | ||
| 2998802 | 440 Magnum - Hood Challenger & Charger 72-74 | 48.50 each |
| 3443516 | 440 Magnum - Hood Charger Power Bulge | 36.95 each |
 | ||
| 2998804 | 440 Six Pack - Rally, Power Bulge Hood | 36.00 each |
| 3462491 | 440 Six Pack - Right Shaker | 65.00 each |
| 3462492 | 440 Six Pack - Left Shaker | 65.00 each |
 | ||
| 2998896 | “440+6” Hood Decal 1970 Plymouth Road Runner/GTX 440 Six Barrel Applications (Sold as a Pair) | 38.50 (PAIR) |
 | ||
| 3412427 | “440 6BBL” Hood Decal—1969 1/2 Plymouth Road Runner 440 Six Barrel “Lift-off Hood” Applications (Sold as a Pair) | 28.50 (PAIR) |
 | ||
| 3412423 | “SIX PACK” Hood Decal 1969 1/2 Dodge Super Bee 440 Six Pack ‘Lift-off Hood”Applications | 36.50 |
 | ||
| 2998800 | 426 Hemi | 47.50 each |
 | ||
| 3574059 | 400 Magnum | 29.95 |
 | ||
| 2998801 | 383 Magnum - Challenger Hood 70-71 | 49.95 |
| 3443627 | 383 Magnum - Charger Hood 71 | 29.95 |
 | ||
| 3691468 | 360 Four-Barrel | 36.00 |
 | ||
| 3573632 | 340 Magnum | 29.95 |
 | ||
| 3443247 | 340 Four Barrel | 36.50 each |
 | ||
| P3612874 | “340” Nameplate (1970 Dodge Swinger, 1972 Demon, 1973 Dart Sport) | |
 | ||
| 3444938 | Challenger | 36.50 each |
| ||
| P5153481 | “392 Hemi” Decal | |
 | ||
| 3504807 | Charger - fender 71-74 | 36.00 each |
| 2841886 | Charger - 66-74 | 32.50 each |
 | ||
| 2998798 | Cuda 440-6 | 36.50 each |
 | ||
| 2998796 | Cuda 383 | 29.95 |
 | ||
| 3443159 | Cuda 340 | 36.50 each |
 | ||
| 3505419 | Dart | 30.00 each |
 | ||
| 3680304 | Duster | 36.50 each |
 "D" "O" "D" "G" "E" | ||
| 2579655 | Letter D | 29.95 |
| 2579656 | Letter O | 29.95 |
| 2579657 | Letter G | 29.95 |
| 2579658 | Letter E | 29.95 |
 | ||
| 3504289 | GTX - quarter 69-71 | 42.00 each |
| 2785518 | GTX - fender 67, deck lid 72-74 | 35.00 each |
| P3680160 | “GTX” Nameplate — Front Fender (1973–74 GTX) and Rear Deck Lid (1970 Road Runner GTX) | each |
 | ||
| 3691667 | Magnum | 22.50 each |
 | ||
| 2785791 | Plymouth - 70-72 Duster Hood, 68-69 GTX,RR Hood | 29.95 each |
| 2998042 | Plymouth - 70 RR,GTX hood, 71 Cuda Hood | 35.50 each |
| 3444927 | Plymouth - Decklid 70-72 Duster | 34.00 each |
 | ||
| 3505490 | Road | 36.50 each |
| 3505491 | Runner | 36.50 each |
 | ||
| 4022410 | Road Runner Decal LT | 26.50 each |
| 4022411 | Road Runner Decal RT | 26.50 each |
 | ||
| 3672656 | Road Runner Decal 1971–75 Various Applications | 28.50 |
 | ||
| 2964116 | Road Runner Decal 1969–70 Various Applications | 19.95 |
 | ||
| 2842873 | Road Runner Decal 1968 Plymouth Road Runner Deck Lid with Finish Panel | 28.50 |
 | ||
| 2842756 | Road Runner Decal 1968 Deck Lid & Dashboard | 14.95 |
 | ||
| 2842757 | Road Runner Decal 1968 Left Door | 24.50 |
 | ||
| 2842758 | Road Runner Decal 1968 Right Door | 24.50 |
 | ||
| 3445223 | R/T - decklid/fender Challenger | 46.50 each |
| 2901812 | R/T - Quarter 69 Charger/Coronet | 36.50 each |
| 2786711 | R/T - Grille 68 Coronet | 36.00 each |
| 2785579 | R/T - Fender 68 Coronet | 36.00 each |
| 2998547 | R/T - Grille 70-71 Challenger | 36.00 each |
| 2898886 | R/T - Grille 69 Coronet | 36.00 each |
 | ||
| 2782966 | SE | 36.50 each |
 | ||
| 2998065 | Bee - Hood 70 | 47.50 each |
| 2949303 | Bee - Grille 69 | 48.50 each |
| 2964435 | Bee - Decklid 69 | 48.50 each |
 | ||
| 2998749 | Super Bee - Hood | 55.00 each |
 | ||
| 3446861 | Swinger | 48.50 each |
 MOPAR RESTORATION DECALS | ||
| 77R06170 | Air Cleaner Element Service Decal, 1968-71 340 4bbl., 383 4bbl. And 440 4bbl. w/o Air Induction | $12.00 |
| 77R06171 | Air Cleaner Element Service Decal, 1969-71 All vehicles w/ Multi-Carburetion Air Induction -Type Hoods, All AAR and T/A cars. | $12.00 |
| 77R06172 | Air Cleaner Element Service Decal 1970 AAR and T/A applications | $12.00 |
| 77R06173 | Air Cleaner Element Service Decal 69 1/2 Lift-Off hood applications (contains two decals) | $12.00 |
| 77R06174 | “Mopar” Radiator Coolant Decal | $12.00 |
| 77R06175 | “Chrysler” Radiator Coolant Decal | $12.00 |
| 77R06176 | “Shaker” Hood Decal | $17.95 |
| 77R06177 | “Customer Car” Paper Floor Mat - Plymouth (Blue) | $27.50 |
| 77R06178 | “Customer Car” Paper Floor Mat - Dodge (Red) | $27.50 |
| 77R06179 | 1964,‘65 & ‘68 Super Stock HEMI Factory Race Car Disclaimer Decal | $15.50 |
| 77R06180 | Chrysler Airtemp window decal | $12.00 |
| 77R06181 | “440 SIX BARREL” Air Cleaner Lid Decal | $19.50 |
| 77R06182 | “440 MAGNUM SIXPACK” Air Cleaner Lid Decal | $19.50 |
| 77R06184 | “340 SIX BARREL” Air Cleaner Lid Decal | $24.00 |
| 77R06185 | “340 SIX PACK” Air Cleaner Decal | $24.00 |
| 77R06183 | “426 HEMI” Air Cleaner Lid Decal | $19.50 |
 Rallye Wheel Center Caps are made from original tooling w/ correct astrotone finish | ||
| 4510579 | 1970 R/Wheel center cap 4.5 bolt circle | 55.00 each |
| 3461066 | 1971 R/Wheel center cap 4.5 bolt circle | 68.50 each |
| 3461458 | 1972-75 R/Wheel center cap 4.5 bolt circle | 48.50 each |
| Road Wheel - Center Dome | ||
| 3580466 | 1966-78 road wheel center dome | 62.50 each |
|
Wheel Paint | ||
| 4529876 | Polyurethane formulated Argent Silver paint gives that factory look to wheels, grilles and light bezels, or wherever Argent paint was used. | 8.50 |
RWD Wheel Stud Sets | ||
| 4120610 | RWD Wheel Stud Set — 1/2" Diameter Disc Brakes (A-, B- and E-Body) | 15.95 |
| 4120625 | RWD Wheel Stud Set — 1/2" Diameter Drum Brakes (A-, B- and E-Body) A. B. C. | 38.95 |
 Chrome Lug NutThese O.E., high-quality chrome lug nuts are designed for use on all Road and Rallye wheel applications and 1969-1/2 A12 6-bbl Road Runner and Six Pack Super Bee vehicles. Available in left- and right-hand threads. Sold individually. | ||
| 02823848 | Chrome Lug Nut (Right-hand Thread) | 5.95each |
| 02823849 | Chrome Lug Nut (Left-hand Thread) | 5.95each |
 WHEEL TRIM RINGS | ||
| 3461043 | Chrome Trim Ring 15 X 7 rims | 82.50 |
| 3461222 | Brushed Trim Ring 15 X 7 | 77.50 |
| 5153310 | Chrome Trim Ring 15 x 6-6.5 | 82.50 |
| 2944424 | Brushed Trim Ring 14 x 6 | 70.00 |
INTERIOR TRIM PARTS | ||
| 77R06036 | B-Body Front Armrest Base (13") (SOLD AS A PAIR) | 115.50 |
| 77R06037 | B-Body Front Armrest Base (16-1/4") (SOLD AS A PAIR) | 128.50 |
| 77R06038 | B-Body Rear Armrest Base (9") (SOLD AS A PAIR) | 89.95 |
| 77R06039 | 1968 Dodge Charger, Super Bee and Coronet R/T (w/Rallye Instrument Cluster) 5 Piece Dash Bezel Fascia - Black | 725.00 |
 | ||
| 77R06040 | 1969 Dodge Charger, Super Bee and Coronet R/T (w/Rallye Instrument Cluster) 5 Piece Dash Bezel Fascia - Black | 550.00 |
 | ||
| 77R06041 | 1969 Dodge Charger, Super Bee and Coronet R/T (w/Rallye Instrument Cluster) 5 Piece Dash Bezel Fascia - Simulated Woodgrain | 795.00 |
| 77R06042 | 1970 B-Body Rallye Instrument 5 Piece Dash Bezel Fascia kit - Woodgrain | 795.00 |
 | ||
| 77R06043 | 1970 B-Body Rallye Instrument 5 Piece Dash Bezel Fascia kit - Black | 550.00 |
| 77R06045 | 1970-74 Challenger/Cuda BLACK Rallye Dash Gauge Bezel Housing - Main Gauge Bezel | 305.50 |
| 77R06046 | 1970-74 Challenger/Cuda Black Rallye Black Rallye Bezel Housing w/3 & 4 Switch Side Pod | 218.50 |
 | ||
| 77R06051 | 1966-69 B-Body 4-Speed Rubber Shifter Boot - For Console Applications | 85.50 |
| 77R06056 | Challenger/Cuda Clock Reset Cable. (CABLE ONLY, NO BEZEL) | 115.50 |
| 77R06057 | Challenger/Cuda Woodgrain Rallye Gauge Fascia w/ 3 switch - 1970-71 Applications. Includes 3 switch & gauge fascia w/mounting back plates | 295.00 |
| 77R06058 | 1970-71 Challenger/Cuda Woodgrain Rallye Gauge Fascia w/4 switch. Includes 4 switch w/ “REAR DEFROST” and gauge fascia w/mounting plates | 295.00 |
| 77R06059 | 1970-71 Challenger/Cuda Woodgrain Rallye Gauge Fascia w/4 switch. Includes 4 switch w/ “TOP LIFT”, gauge fascia w/mounting back plates | 310.50 |
| 77R06060 | 1972-74 Challenger/Cuda Woodgrain Rallye Gauge Fascia w/3 Switch. Includes 3 switch & gauge fascia w/mounting back plates | 295.00 |
 | ||
| 77R06061 | 1972-74 Challenger/Cuda Woodgrain Rallye Gauge Fascia w/4 switch. Includes 4 switch w/ “REAR DEFROST”, gauge fascia w/mounting back plates | 225.00 |
| 77R06068 | Inside Door Handles, 1968-70 B- Body Applications (SOLD AS A PAIR) | 89.95 |
| 77R06069 | Inside Door Handles, 1971-74 B-Body Applications (SOLD AS A PAIR) | |
| 77R06070 | 68-74 B & E-Body Window crank handle set (SOLD AS A SET OF 4) | |
| 77R06071 | Inside Door Handles, 1970-74 Dodge Challenger applications (SOLD AS A PAIR) | |
| 77R06082 | 1970-71 Challenger/Cuda Rallye Gauge Lens Package. Includes 3 light tubes | 235.50 |
| 77R06083 | 1970-74 Challenger/Cuda Rallye Gauge Indicator Lenses (SOLD IN A SET OF 3) | 54.50 |
| 77R06084 | 1972-74 Challenger/Cuda Rallye Gauge Lens. Includes 3 light tubes | 239.95 |
| 77R06124 | 1967-68 B-Body Console Top Plate Chrome, Four-Speed Applications | 515.50 |
 | ||
| 77R06126 | 1969-70 B-Body Console Top Plate Woodgrain, Four-Speed Applications | 515.50 |
 | ||
| 77R06127 | 1970-74 B & E Body Auto Chrome Slap Stick Shifter Plate | 124.50 |
| 77R06133 | 1970-74 E-Body Starter Shield. Plastic shield mounted to the frame to guard the starter on automatic trans cars | 62.50 |
 | ||
| 77R06101 | 1970-74 Challenger/Cuda Inside Door Locks Knobs (SOLD AS A PAIR) | 48.50 |
 | ||
| 77R06284 | Restoration Turn Signal Lever | 29.95 |
EXTERIOR TRIM PARTS | ||
| 77R06049 | Black Headlight Bezels- 1971 Cuda (PLASTIC - NOT CHROMED OR PAINTED) | 168.50 |
| 77R06050 | 1971 Cuda Chrome Headlight Bezels. Plastic chromed headlight rings (SOLD AS A SET OF 4) | 359.00 |
| 77R06052 | Air Grabber Actuator Bracket | 79.95 |
| 77R06053 | Road Lamp Brackets - 1970 Cuda (SOLD AS A PAIR) | 67.50 |
| 77R06054 | Headlight Brackets - 1971 Cuda Brackets mount to the headlight bucket for the 4 light setup including mounting feet (SOLD AS A PAIR) | 385.00 |
| 77R06055 | Road Lamp Brackets - 1971 Cuda (SOLD AS A PAIR) | 68.50 |
| 77R06062 | Air Grabber Door - 70-72 Plymouth Road Runner/GTX; 1971-72 Dodge Charger | |
 | ||
| 77R06063 | Flip Top Gas Cap Package - 1970-71 Dodge Challenger (Includes cap & trim ring) | |
| 77R06064 | Side Mirror Gasket Package - 1970 Challenger/Cuda applications (SOLD AS A PAIR) | |
| 77R06065 | Side Mirror Gasket Package - 1971 Challenger/Cuda applications (SOLD AS A PAIR) | |
| 77R06066 | 71 Cuda Front Fender Gills. Sold as a kit of 8, includes gaskets | 695.00 |
| 77R06067 | 70 Cuda AAR/Grand Coupe chrome grill. Rectangular chrome grill inserts (SOLD AS A SET) Mounting Clips not included | 425.00 |
| 77R06072 | Inside Door Handles, 1970-74 Plymouth Cuda (SOLD AS A PAIR) | 63.50 |
| 77R06073 | Bumper Jack Hook, 1970-71 Cuda Applications. Part number “100” for use on chrome steel bumpers | 156.50 |
| 77R06074 | Bumper Jack Hook, 1970-71 Cuda Applications. Part number “101” for use on rubber bumper applications | 156.50 |
| 77R06075 | Bumper Jack Hook, 1970-71 Dodge Challenger Applications. Part Number “102” for use on steel chrome or rubber bumpers | 156.50 |
 | ||
| 77R06076 | Rear Tail Light Housing, 1970 Dodge Challenger applications (SOLD AS A SET OF 3 PIECES) | 589.00 |
| 77R06078 | 1970-71 Dodge Challenger Front Side Marker Housings (SOLD AS A SET OF 2 PIECES w/ pig tails) | 208.50 |
 | ||
| 77R06079 | “Plymouth Division” dog dish hub caps - alumin. caps w/”Plymouth Division” stamped in the face, 1969-70 applications (SOLD AS A SET OF 4) | 185.50 |
| 77R06081 | Front Valance Insert, 1971 Cuda applications (Mounts on the inside of the valance) | 515.00 |
| 77R06085 | 1970 Plymouth Cuda Front Turn Signal Lenses. Mounts in the grille (SOLD AS A PAIR) | 398.50 |
| 77R06086 | 1970-71 Dodge Challenger Front Amber Marker Lens Set (SOLD AS A PAIR) | 102.00 |
| 77R06087 | 1970-71 Dodge Challenger Red Side Marker Lens Set (SOLD AS A PAIR) | 102.00 |
| 77R06088 | 1970-71 Plymouth Cuda Front Amber Side Marker Lens Kit. Includes all 4 lenses | 78.50 |
| 77R06089 | 1970-71 Plymouth Cuda Rear Side Marker Lens Kit. Includes all 4 lenses | 78.50 |
| 77R06090 | 1971 Dodge Charger RT/SE Tail Light lenses. Rear tail light lenses (SOLD AS A PAIR) | 515.50 |
| 77R06091 | 1971 Cuda front turn signal lenses. Mounts in the valance (SOLD AS A PAIR) | $239.95 |
 | ||
| 77R06092 | 1971 Road Runner GTX Tail Light lenses. Rear tail light lenses (SOLD AS A PAIR) | $515.50 |
| 77R06094 | Air Cleaner Lid, for 1970-72 340/383/400/440 4 BBL. Road Runner/GTX, Charger, Super Bee, Coronet R/T Applications with Fresh Air | $119.00 |
| 77R06095 | 1970 Plymouth Cuda grille marker light assy. Mounts in the 70 Cuda grille includes housing, pig tails and lenses (SOLD AS A PAIR) | $675.00 |
| 77R06096 | 1970 Dodge Challenger Fender Marker Indicators. Turn signal indicators mounted on top of the fender including housings, lenses, bulb & pig tail (SOLD AS A PAIR) | $162.00 |
 | ||
| 77R06097 | 1970-71 Dodge Challenger Side Marker Housings Includes front & rear w/lenses and front pigtails | $510.50 |
| 77R06098 | 1970-71 Plymouth Cuda Side Marker Housings. Includes the small cast light housings, front pig tails, stamped retaining plates and all lenses (SOLD AS A SET/1 Front & 2 Back) | $475.00 |
| 77R06099 | 1971 Plymouth Cuda & Road Runner fender indicators. Turn signal indicators mounted on top of the fender including housings, lenses, bulb & pig tail (SOLD AS A SET) | $219.00 |
| 77R06100 | 1971 Plymouth Cuda Front Marker Housings. Mounts in the front valance includes lenses & pig tails (SOLD AS A PAIR) | $575.00 |
| 77R06102 | 1972 Road Runner Header Panel Medallion decal not included. Mounts in the center of the header panel | $245.00 |
 | ||
| 77R06104 | 1970 Challenger/Cuda Left Remote Mirror- Chrome | $325.00 |
 | ||
| 77R06105 | 1970 Challenger/Cuda Left Remote Mirror- Painted (PRIMED) | $285.00 |
 | ||
| 77R06107 | 1970 Challenger/Cuda Right Non-Remote Mirror- Chrome | $325.00 |
 | ||
| 77R06108 | 1970 Challenger/Cuda Right Non-Remote Mirror- Painted (PRIMED) | $325.00 |
| 77R06110 | Mirror, Left Remote Chromed 3-1/4" Fits 1971-74 Challenger/Cuda and 1971-72 Road Runner/GTX/Charger | $239.50 |
| 77R06111 | Mirror, Left Remote Chromed 5" Fits 1973-74 Road Runner/Charger | $275.00 |
| 77R06112 | Mirror, Left Remote Painted 3-1/4” Fits 1971-74 Challenger/Cuda and 1971-72 Road Runner/GTX/Charger | $275.00 |
| 77R06113 | Mirror, Left Remote Painted 5” Fits 1973-74 Road Runner/Charger | $275.00 |
| 77R06114 | Mirror, Right Non-Remote Chrome 3-1/4” - Fits 1971-74 Challenger/Cuda and 1971-72 Road Runner/GTX/Charger | $248.00 |
| 77R06115 | Mirror, Right Non-Remote Chrome 5” Fits 1971-74 Road Runner/Charger | $275.00 |
| 77R06116 | Mirror, Right Non-Remote Painted 3-1/4” - Fits 1971-74 Challenger/Cuda and 1971-72 Road Runner/GTX/Charger | $275.00 |
| 77R06117 | Mirror, Right Non-Remote Painted 5” Fits 1971-74 Road Runner/Charger | $275.00 |
| 77R06122 | 1971 Plymouth Cuda Fender Gill Mounting Plates (SOLD AS A SET OF 4) | $89.95 |
| 77R06123 | Hood Pin Kit, B & E-Body Hood Pin Kit w/23" lanyard length | $62.50 |
 | ||
| 77R06128 | Deck Lid Luggage Rack- Stainless Steel 1970-71 Challenger/Cuda Applications | $550.00 |
| 77R06129 | Deck Lid Luggage Rack- Stainless Steel 1970 Dodge Charger applications. Includes all required hardware & correct steel tips | $550.00 |
| 77R06130 | Headlight Rings- 1972-74 Challenger Applications (SOLD AS A SET OF 4) | $189.50 |
| 77R06131 | 1970, 72, 73, 74 Plymouth Cuda Inner Headlight Splash Shield Except Bolts behind the headlight bucket (SOLD AS A PAIR) | $125.00 |
| 77R06135 | 1971-74 Road Runner/GTX/Charger Chrome Exhaust Tips (Long style) 2-1/2" Slotted w/Black Insert, Stainless Steel (SOLD AS A PAIR) | $350.00 |
 | ||
| 77R06136 | 1971-74 Road Runner/GTX/Charger Chrome Exhaust Tips short style Slotted w/Red Insert, Stainless Steel Construction (SOLD AS A PAIR) | $350.00 |
| 77R06137 | 1970-74 Dodge Challenger Exhaust Tips (SOLD AS A PAIR) | $219.00 |
| 77R06138 | 1970-74 Plymouth Cuda Chrome Exhaust Tips (SOLD AS A PAIR) | $189.50 |
 | ||
| 77R06139 | 1970-74 Plymouth Cuda Chrome Exhaust Tips 2-1/2" O.D. Stainless Steel Construction (SOLD AS A PAIR) | $250.00 |
 | ||
| 77R06143 | Rallye Wheel Center Caps - 1971 Duster, Dart, Demon Applications- Dark Agent, Small bolt pattern (SOLD AS A PAIR) | $258.50 |
| 77R06144 | Rallye Wheel Center Caps - 1970 Duster, Dart, Swinger Applications- Light Agent, Small bolt pattern (SOLD AS A SET OF 4) | $258.50 |
 | ||
| 77R06145 | Standard Hub Cap Package- Stainless Steel with Dodge Logo w/red circle. 1969-74 Applications (SOLD AS A SET OF 4) | $275.00 |
| 77R06146 | Standard Hub Cap Package- Aluminum Plain- Used on 1971-78 Plymouth Applications | $250.00 |
Updated 11/07
more parts available - call for prices
| Back to Index | Order Complete Catalog |Back to top | Secure Order Form |