Call: 336 752 2879
Fax: 336-752-2869

Back To Index - Contact Info - Secure Ordering

Classic Hemi and Related Parts

P5153312

Also see Hemi Crate Motors and Blocks

Classic Hemi Engine Installation Components

Now Mopar offers these much needed parts to make your 426 Hemi original production or crate engine installation easier. Each part sold individually.

P4510281	Crank Pulley (w/power steering)	266.00
P4510286	Crank Pulley without Power Steering	185.00
P4510282	Waterpump Pulley	185.00
P4510283	Crank Pulley Spacer	68.75
P4510284	Oil Dipstick and Tube	81.75
P4510285	Coil Bracket	21.00
P4510287	Engine Mount Bracket (2 required)	276.00
P4510288	LH Insulator	134.00
P4510289	RH Insulator	35.50

Engine Teardown Gasket Set

All gaskets needed for complete Hemi engine teardown, including oil pan, cylinder head, valve cover, timing chain case cover, intake manifold and oil pump.

P3412083

426 hemi V8 engine(1966 and later)

94.76

Rear Main Bearing Seal Retainer Kit

Kit contains engine rear main seal retainer, retainer bolts and seal package.

P4529732

Rear Main Bearing Seal Retainer Kit

62.00

Oil Seal Package

Includes crank seals and installation tool.

P4271961

Oil Seal Package

9.50

Block Hardware Package

Includes all necessary dowels, plugs, bushings and keys, as well as core plugs, rear cam bearing plug, drive gear bushing and head dowels.

P5249259ab

Engine Cylinder Plug Kit (426 Hemi)

105.50

Core Plugs

These round, press-in engine Core Plugs fit standard or Mopar race cast iron blocks.

P5249708

Hemi engines-brass

24.00

Forged Crankshafts — Machined

High-strength, high-quality Forged Crankshafts machined from 4340 steel. For high-performance race applications. 8-bolt flange.

P5007251	Forged Race Crankshaft — 3.75" Stroke, Full Radius, 8-Bolt, Balance	1,650.00
P5007250	Forged Race Crankshaft — 4.15" Stroke, Full Radius, 8-Bolt, Balanced	1,475.00

CRANK KEY PACKAGE

Contains two keys.

P5249822

Hemi

4.65

Crank Bolt Package

Used to attach the vibration damper to the crankshaft.

P5249557AB	Crank Bolt Package — 2.25" Length (Hemi with Aftermarket Dampers)	8.50
P5249562	Thin Damper Crank Bolt Package — 1.25" Length (Hemi with OEM Dampers)	16.75

Thin Crank Vibration Damper

Designed for forged cranks and used primarily in Big Block and Hemi engines. It features 90° index markings and a symmetrical 6-bolt pattern for pulley attachment. On pre-1972 engines with stock pulleys, minor modifi cations will be needed to attach bottom pulley. Not SFI approved. Must use 383/440 engine pulleys.

P3830183

Thin Crank Vibration Damper

250.00

Timing Tape

Improve timing accuracy with Damper Degree Timing Tape. Marked in 90° increments, a self-adhesive strip adheres to crank vibration damper for clear identifi cation of marks. Permits reading spark advance up to 60° instead of only 10°–15° as on chain case timing tab. (Damper not included)

P4529070AB

Damper degree timing tape

7.50

Steel Vibration Damper

Features a steel ring and a universal 6-bolt front pulley mount pattern. SFI approved.

P5249699

Steel Vibration Damper (426 Hemi)

350.00

Hemi Oil Slinger

Protects front seal from excessive oil contact and forces lubricant oil into chain.

P5249636

Hemi Oil Slinger

7.50

Double Roller Chain and Sprocket Sets

Provide added durability and decreased rotational friction versus production silent chains. Three machined keyways in crank sprocket adjust the cam timing. Kits include magnafluxed sprockets and roller timing chain.

P5249269

Double Roller Chain and Sprockets —
3-Bolt Mount (426 Hemi)

84.00

Chrome-Plated Front Timing Chain Cover

Includes cover, seal and gasket.

P4349816

chrome plated front cover

38.75

Chrome Bolt Package for Front Timing Chain Cover

Engine chrome dress-up projects are incomplete without chrome bolts.

P4452795

Chrome Bolt Package for Front Timing Chain Cover

21.50

Front Cover Seal and Gasket

P4876769	Hemi timing cover gasket	7.50
P4876280	Seal-hemi front cover	10.50


	HEMI HYDROLIC CAM AND LIFTER PKGS
P4529315	284/284dur 72o/lap 484/475lift 1970/71 resto	194.00
	HEMI MECH. CAM AND LIFTER PKGS
P4529316	284/284dur 72o/lap 484/475 lift 1968/69 resto	175.50

	HYDRAULIC TAPPETS(sold individually)
P4006767	Hemi engine	7.50
	MECHANICAL TAPPETS(sold individually)
P2843177	"Hemi race applications(0.0005" undersize)	7.50

	ROLLER TAPPET SETS
	Matched pair with guide bar.
P4452920	Hemi engine-standard size	55.75 each pair
	HEMI MECHANICAL PUSHRODS
P90002	426 hemi set of 16(10.47"&11.45"	149.95
P4529549	426 hemi intake,3/8" dia. Overall length of
	10.65"(sold individually)	12.00
P90003	Hemi mechanical cam pushrod set-RACE	179.95
	HYDRAULIC PUSHROD
P4529561	426 hemi set of 16 (10.47" &11.45"	93.00
P4529547	426 hemi intake,3/8" dia. Overall length of
	10.47"(sold individually)	12.00
P4529548	426 hemi exhaust,3/8" dia. Overall length of
	11.45"(sold individually)	12.00

	Camshaft Sprocket Bolt Kit
P5007801	Camshaft Sprocket Bolt Kit, Includes 3 Bolts	26.00

	426 ALUMINUM HEMI HEADS(EACH)
	2.25" intake and 1.94" exhaust valve
	machining and 170cc combustion chamber.
	valve seats and guide inserts.
	BARE MACHINED HEADS ( EACH)
P5153779	Aluminum 426 Hemi head	955.00 each
	HEAD ASSEMBLY
	Includes valves,springs,retainers and keepers
P5153875	Aluminum hemi head assembly	1,248.50 each

	426 CAST IRON STREET HEMI HEADS
Hemi Cast Iron Cylinder Heads are designed for more power. Stiffer and stronger than original, increased material permits porting for improved airfl ow. Features the same outward appearance as the original 1966–71 heads, except for the shape of the alternator boss. All components attach the same as original (intake and exhaust valves, valve guides, seats, rocker gear, etc.). Features 170 cc combustion chamber and 2.25" intake and 1.94" exhaust valve machining.
P4529898	Cast Iron Bare Machined Head (426 Hemi)	1,050.00 each
P4876855	Cast Iron Cylinder Head Assembly (426 Hemi Crate Engine)	1,275.00 each

	STEEL SHIM HEAD GASKET SETS
	0.020" compression thickness ( 1 set)
P4120247	Hemi (cast iron hemi heads)	48.50

	COMPOSITION MATERIAL HEAD GASKETS
	Thick,0.040" to 0.042",up to 12.5:1
	compression ratio.(sold as a set)
P4876071	Hemi-over 4.380" bore	168.00
P4529456	Hemi-standard bore	275.00

	HEMI CYLINDER HEAD HARDWARE KIT
	Contains 4 head freeze plugs and 10 dowel
	pins for the rocker stands.
P5249570	Hemi cylinder head hardware kit.	15.50

	HEAD BOLT SETS
	Includes all head bolts and washers.
P4529978	Hemi engine(includes the required 8 studs and nuts)	222.00
Here are new stamped steel covers available in chrome and black wrinkle finish. These lower cost/high quality covers also have the advantage of added rocker clearance.
HemiCoverChrome	Hemi-chrome stamped steel covers	319.00
HemiCoverBlack	Hemi-black stamped steel covers	299.00
Here are new Hemi cast valve covers. These lower cost/high quality covers also have the advantage of added rocker clearance.
HemiCoverCast	Hemi cast aluminum covers	299.00
HemiCoverBreathers	Hemi valve cover Breathers	79.00
HEMI CHROME VALVE COVERS Features quality chrome plating. Includes two valve covers and gaskets. Valve cover gaskets are not included.

P4529338	Hemi chrome valve covers	395.00
P4120353	Valve Cover Gaskets Rubber Reinforced Cork, Two Per Set	35.50

4236 Hemi O.E. Cover Set (Black Painted) Mopar Performance takes another giant step to help the restoration crowd with these O.E. black wrinkle 426 Hemi valve covers. Original equipment for all 1966-71 426 Hemi engines, these stamped steel, black wrinkle covers have the spark plug wire brackets and rubber coated alternator wiring looms. The set includes left and right valve covers, chrome breather cap, metal PCV valve, chrome PCV cap, and hold-down studs and nuts.
P4510577	426 Hemi Valve Cover Set (1970-71)	672.00
P4529339	Black Wrinkle Valve Cover Set (1966–69 426 Hemi)	659.95
P4120353	Valve Cover Gaskets Rubber Reinforced Cork, Two Per Set	35.50

	CAST ALUMINUM 426 HEMI VALVE COVERS
	Painted black wrinkle and finned with Hemi logo cast in. for single plug cylinder head applications. Uses street hemi valve cover rail.
P5007796	Hemi-single plug	769.00

	Service Parts For Cast Aluminum
	Hemi Valve Covers
P5249947	stud and nut kit for cast hemi valve covers long.	42.75
P5007499	breather-bolt-on for cast hemi valve covers	122.00
P5249949	filler cap-screw in for cast hemi valve covers	15.50

	426 HEMI VALVE COVER STUD & NUT PKG
	Acomplete set of 20 studs and 20 nuts to fit
	1966-71 426 hemi heads to retain factory
	valve covers.
P4529897	426 hemi valve cover stud & nut pkg.	18.95

	VALVE COVER GASKET SET
P4120353	Street hemi-1966 and later	34.50
	PUSH-ON BREATHER-STREET HEMI
	They are designed to fit all production style
	hemi valve covers,including mopar performance
	parts chrome or black wrinkle covers.
P4529896	426 hemi push-on breather	44.80

	PCV PACKAGE-STREET HEMI
	kit contains: 1 pcv valve cap,a pcv valve&nut
	and 1 pcv valve retaining spring. Fits 1964-69
	hemi valve covers.
P4529895	426 Hemi pcv package	66.00

	HEMI VALVES (EACH)
P5249203	intake 2.25dia.5.40length stainless,1s groove 5/16" stem	16.50
P5249204	exhaust 1.94dia.4.86length stainless,1s groove 5/16" stem	15.50

	VALVE SEALS (VITON)
P5249661	16 pcs, 5/16" stem size for 426 hemi	15.50

	VALVE STEM LASH CAPS
P4120635	5/16" stem	89.95

	VALVE GUIDES
	sold individually
P4876709	hemi,5/16" valve stem,intake	16.50
P4876710	hemi,5/16" valve stem,exhaust	16.50
Valve Keepers (Split Locks) These single groove-style Hemi Split Locks are made from hardened material. They feature a 5/16" stem diameter and can be used for restoration or performance applications. Sold as cylinder head sets of 16 pieces. Note that two sets are required for all V8 engines. For 426-based Hemi.
P4120634	Valve Keepers, 7º	34.50
P4529038	Valve Keepers, 10º	50.00

	HEMI VALVE SPRINGS (EACH)
P4286812	single/damper430/460lift chrome-van	10.75
P3690933	single/damper 440/500lift chrome-van	8.50
P5249848	single/damper 480/540lift chrome-sil	10.75
P2806077	dual/damper 500/610lift chrome-van	22.50
P4876064	dual/damper 590/640lift chrome-sil	11.50
P5249849	dual/damper 650/750lift chrome-sil	16.00
P4007536	triple 640/745lift chrome-sil	18.95


	HEMI VALVE SPRING RETAINERS (each)
P4452769	steel 8° single	15.50
P4529288	chrome-moly 8° single/dual	11.50
P4120785	titanium 10° dual	34.95
P4286775	titanium 10° triple,increase .060"	21.50

	HEMI ROCKER SHAFT SPRINGS
	Includes 14 long springs and 2 short springs pkg.is one engine set.
P4452827	Hemi rocker spacer spring pkg.	32.00

	ROCKER SHAFT SUPPORTS
	Blue anodized extruded aluminum rocker
	shaft for 426 hemi. Complete engine set,
	includes 10 pieces plus hardware.
P5249505	Hemi rocker shaft supports	1,105.00

	ROCKER SHAFTS
P5249631	mech.valve gear,chrome,hemi heads, intake, on-center-individual	144.95
P5249632	mech.valve gear,chrome,hemi heads exhaust, on-center-individual	144.95

	ROCKER SHAFT END PLUGS
	Fits Hemi engines. Does not fit aftermarket rocker shafts.
P5249633	set of four	7.50

	426 HEMI FORGED STEEL MECHANICAL ROCKER ARMS
	Made of 1041 forged steel,fits both the
	cast iron and aluminum heads.
P4529705	Hemi-production ratio,intake	118.50
Aluminum Rocker Arm Set (Not Shown) NEW! Independent Shaft Rocker System designed and patented by Hemi legend Ray Barton. If your Hemi is running all-out, you know the need for a full-roller rocker system that maintains valve train geometry throughout the RPM range and the entire range of rocker arm travel. Reduces friction and valve train weight. Provides easy access to valve springs on race day so you can make critical adjustments and changes quickly. Case hardened and tempered shafts, 7/16" diameter adjusters and jam nuts.
P5153782	Rocker System, Roller, Race, Aluminum, Engine Set	4,795.00
Stainless Steel Roller Tip Rocker Arms Made from high-strength, investment grade cast stainless steel. Each features a roller tip to reduce friction and improve geometry. Designed for drag racing and high strength, they use standard Hemi rocker ratios. Sold individually. 426 Hemi.
P5249604ab	Roller Tip Rocker — 1.55 Ratio Exhaust	121.95
P5249603ab	Roller Tip Rocker — 1.5 Ratio Intake	121.95
Rocker Shim Package Use to improve adjustable rocker arm-to-valve tip alignment. 0.015" thick. 12 per set. 426 Hemi..
P3690896	Rocker Arm Spacer Set	10.75
Dual Quad Intake Manifold Back by popular demand – the original 1966-71 Street In-line, Dual Quad Intake Manifold. Uses original Carter AFB carburetors and maintains mounting bosses for throttle return brackets. Features factory casting machining numbers along with the Chrysler Pentastar logo. This Aluminum Dual Quad Intake Manifold has been designed specifi cally for the 426 Street Hemi. Note: Manifold comes unpainted.
P5153737	Aluminum Dual Quad Intake Manifold	415.95
Single Plane Intake Manifold Single Plane Intake manifold for Hemi engines with serious airflow requirements. This intake was designed by Ray Barton for 500 + inch Hemi engines or for applications intending to make over 600 HP. The intake manifold can be the limiting factor in a heavy-breathing engine like Mopar's Hemi. Don't let your top end get all bottled up. Increased plenum volume over most Dual Plane manifolds. Smooth transition to intake runners from plenum which increases airflow velocity - that's what your high-HP Hemi needs. Integral valley cover pan cleans things up nicely. Carb flange machined for 4150-series Holley.
P5153781	Single Plane Intake Manifold	599.00

V-8 Dual Quad Intake Manifold --8-bbl This new, aluminum in-line Hemi intake manifold is based on the marine version and is built from the original tooling! Machined to accept Holley carburetors (4452778 rear, 4452779 front), this manifold will fit production 426 Hemi heads, provisions for manifold heat and power brakes, and retains the stock height as the production 1966-71 Street Hemi AFB Intake Manifold. NOTE: Production AFB air cleaner baseplate/lid will need to be changed or modified. Some O.E. and aftermarket linkage components and fuel lines will be needed to complete installation.
P4510633	V-8 Dual Quad hemi Intake Manifold	545.00

	V8 DUAL PLANE-4 BBL
Rectangle port and fits all hemi 426/472/528 engines. stock exhaust heat location on rear of manifold just like the original dual plane 4bbl production in-line manifold.
P4876188	V8 Dual Plane Hemi Intake Manifold	237.00

	V8 CROSS RAM-8 BBL
	This aluminum cross ram features rectangle
	ports and is designed for 4 bbl carbs. Fits
	Hemi 426/472/528 engines.
P5007534	V8 Cross Ram Hemi Intake Manifold	659.95

	INTAKE MANIFOLD GASKET SETS
	kit comes complete to service one engine
	set ( includes gaskets,end seals,o rings
	and distributor seal where applicable)
P4120086	Hemi 0.060" thick ( fits all hemis except D4-D6)	10.75
P4529534	Hemi 0.090" thick ( fits all hemis except D4-D6)	14.50
P5007334	Cross Ram Gasket for removable top.	10.75
A-990 Cross-Ram Hemi intake manifold screw set Set of 16 allen screws and washers to attach the race hemi cross ram manifold.
P4529330	intake manifold screw set	175.95

	426 HEMI INTAKE MANIFOLD HEAT SHIELD
	For all 426 street hemi intake manifolds.
	also fits M1 4 bbl,P4876188
P4529431	Heat shield-426 hemi intake manifold	64.75

	HEMI MANIFOLD PLUG PACKAGE
	Consists of 8 manifold plugs. Used in hemi cross ram manifolds.
P5249926	manifold plug package	264.50

	NEW! HEMI CROSS RAM CARBURETORS
	These are the exact re-issues of the
	original carburetors.
P4452778	Hemi cross ram carburetor-right hand	797.50
P4452779	Hemi cross ram carburetor-left hand	797.50
Air Horns For use with Holley Cross Ram Carburetors. Perfect for Super Stock competition or restoration. Sold as a pair (front and rear).
P5007809	Air Horns	509.50
Cross Ram Linkage For use with Hemi Cross Ram Intake Manifold P5007534 and Holley Carburetors (P4452778 and P4452779).
P4510635	Cross Ram Linkage	339.25
Hemi Oil Pan Here is a production-style oil pan for 426 Hemi engines that is stamped steel to replicate the 1970-71 E-body pan. The 6-quart pan may also be used on 383/400/440 engines for increased oil capacity.

P4529884	Hemi oil pan	185.00

P5007816	Hemi Oil Pan--8-quart center sump	175.95

	OIL PICKUP AND SCREEN ASSEMBLIES
P4529566	Hemi engine-1966-69	23.75
P4529567	Hemi engine-1970-71	23.75
P5249818	Hemi siamesed bore blocks(except raised cams)	63.95
P5007818	Oil Pickup Assembly 8-Quart, 1/2" Pipe, for Oil Pan P5007816	45.00

	Milodon Low Profile Oil Pan
MD30930	Hemi 7 quart - 7inch Sump Depth	199.00

	Milodon Oil Pickup
MD18335	Hemi 1/2 pipe Inlet	39.50

MP- 8QTBB	Hemi 8qt oil pan / pickup package choice of 3/8" or 1/2" pickup tubes.	119.00

	WINDAGE TRAYS
P4120998	Hemi( includes tray and two pan gaskets- 3.75" stroke	23.75
P5007345	Hemi( includes tray and two pan gaskets- 4.15" stroke	59.25

	OIL PAN GASKETS
P3412049	Hemi (requires 2 for windage tray application	10.75
P4452099	Hemi-race includes 2 gaskets	12.00
	OIL PAN BOLT SETS
P4120613	Hemi V8 standard	10.75

	HIGH PRESSURE RELIEF SPRING
	includes instructions.
P4286571	Hemi	5.00

	HIGH PERFORMANCE OIL PUMP ASSY.
	Provides a 25% increase in oil volume.
P4286590	All hemi engines	87.75

	HIGH VOLUME OIL PUMP BOLT PKG.
P70018	s/steel bolt pkg.for high volume oil pump	9.95
	DIST/OIL PUMP DRIVESHAFT GEAR
	ASSEMBLY W/HARDENED TIP
	Features hardened tip shaft w/ full radius
	blend from hex to round and pinned gears.
P3412064	Extra length for use with milodon oil system	69.95
P3571071	for use with flat tappet cams (non roller)	66.50
P3690875	for use with roller tappet cams aluminum bronze gear	118.50
P3690876	for use with roller tappet cams and milodon oil system-aluminum bronze gear, Extra
	length	189.75
High-Performance Oil Filter Engineered to meet the demands of heavy-duty and high-performance applications. Filter is black with Mopar Performance Pentastar logo.
P4452890	HP oil filter-black finish-Hemi	8.50
Race Oil Filter High-performance, heavy-duty oil filter has a thicker canister with high burst strength. Filter is black with Mopar Pentastar logo.
P4529190	Race Oil Filter — Black Finish	23.75

	RESTORATION OIL FILTERS
P4529805	Restoration Oil Filter, High-Performance, Red/White/Blue	17.25
P4529187	Restoration Oil Filter, Red/White/Blue	17.25
P4529806	Restoration Oil Filter, Black with Yellow Mopar Logo (1962-66 V8)	18.50

	OIL PRIMING SHAFT
	FITS ALL V8's
P4286800	oil priming shaft	7.25

	ALUMINUM HEMI WATER PUMP HOUSING
	Has bosses for both early and late engine
	applications.
P4286900	Hemi engines	175.95
P2206445	Bracket for alternator	16.75

	LIGHTWEIGHT ALUMINUM HEMI WATER PUMP
	Fully assembled and ready to install.
P5007643AB	Hemi engines	94.75

	WATER PUMP INSTALLATION KIT
	Includes water pump gasket,pump housing
	gasket plugs,water pump screws.plus
	long and short housing screws.
P5007449	Hemi engine	32.00

	WATER PUMP ATTACHING BOLTS
	Complete set of chrome bolts for the water pump.
P5007621	water pump and housing bolts Chrome	28.50

	CHROME WATER NECK
	Includes gasket and two chrome bolts.
P4286759	Through 1978-V8	15.50

	90 DEGREE WATER NECK OUTLET
P5249191	90 degree water neck outlet	27.25

	V8 THERMOSTATS
P4876307	180 degree through 1971	7.25
Viscous Fan Package Most late 1960s and early 1970s factory-built muscle cars were equipped with viscous fans for cooling purposes. This package provides thermostatically controlled cooling, and includes a lightweight balanced fan. Offers up to 15 horsepower gain on typical high-performance V8s.
P4120758	Viscous Fan Package	106.50
Radiator Cooling Fan Shrouds Restoration Radiator Cooling Fan Shrouds fi t 26" wide cores only.
P2785434	Restoration Radiator Cooling Fan Shroud (1967–69 426 Hemi, 383/440 Big Block B-Body) 5-stud mounting	73.00
P2998326	Restoration Radiator Cooling Fan Shroud (1970–73 426 Hemi, 383/440 Big Block Band E-Bodies) 4-screw mounting shown	73.00
Radiator Cap When you open the hood, it’s right there where everyone especially the judges can see it. If your radiator cap is more than ten years old or just looks bad, replace it with this original equipment quality piece.
77R06021	Radiator Cap, 16 lb. (22" and 26" Radiator)	40.00

	PLASTIGAUGE ASSORTMENT
	Assortment includes:
	one blue strip for .004"-.009" clearances
	two red strips for .002"-.006" clearances
	two green strips for .001"-.003" clearances
	each strip is 12" long.
P4286819	Plastigauge assortment	7.25

	DEGREE WHEEL
	Helps to centerline camshafts.0-180-0 degrees
	instructions printed on backside.
P4452990	Degree wheel	22.50

	VALVE LASH ADJUSTMENT CHART
	Indicates how to properly set valve lash with
	high lift cams,V8
P4452989	valve lash chart decal	5.00

	TDC INDICATOR TOOL
	Helps determine top-dead-center when
	centerlining cams.
P4349737	TDC indicator tool	26.25