 |
Call: 336-283-0800 |
|---|
Back To Front Page - Contact Info
Ram Truck / Jeep
 | ||
| HEAVY DUTY CAST CRANKSHAFT | ||
| Special,heavyduty performance for small block engine, requires balancing.also features 6-bolt pattern on crank flange. | ||
| P5007258 | 4.00" stroke,360 maine | 860.00 |
| P5007259 | 3.58" stroke,360 mains | 448.00 |
| P5007257 | 3.38" stroke,318/340 mains | 398.00 |
 Double Roller Chain and Sprocket SetsHigh-strength Double Roller Chain and Sprocket Sets provide added durability and decreased rotational friction compared to production silent chains. Sets include Magna-Fluxed sprockets and roller timing chain. | ||
| P5249267 | Double Roller Chain and Sprocket Set — 1-Bolt Mount, Three Matched Keyways (Small Block, 5.2L/5.9L Magnum/Jeep Engines) | 70.00 |
| P5249519 | Double Roller Chain and Sprocket Set — 1-Bolt Mount, One Keyway (2.5L/4.0L Jeep Engines up to 1998) | 143.00 |
 | ||
| VIBRATION DAMPERS | ||
| P5007187AB | Thin Crank Vibration Damper (5.9L Truck Magnum/Jeep Engines, 360 Magnum Crate Engines) | 265.00 |
 | ||
| P5249535 | Replacement Vibration Damper — V-Belt (4.2L Jeep Engines) | 82.50 |
 | ||
| CHROME BOLT SET | ||
| For cast aluminum valve covers only | ||
| P5007620 | chrome bolt set for die cast aluminum valve covers | 41.50 |
| MAGNUM V8 VALVE COVER | ||
| P5007052 | Baffle and screw package | 11.50 |
 | ||
| VALVE SPRINGS | ||
| P4876062 | single w/damper 1.42"OD .480"/.600" lift | |
| chrome-sil (sold individually) | 10.00 | |
 | ||
| 3/8" ROLLER ROCKER STUD KIT | ||
| Required with aluminum magnum heads and aluminum roller rocker arms. | ||
| P5007645 | 3/8" stud kit required for aluminum magnum roller rocker arms. | 109.50 |
Also See the Milodon Page | ||
 MPI CONVERSION KITS | ||
| SERVICE PARTS FOR MPI JEEP KITS | ||
| P5007150 | fuel pump-all mpi kits | 151.00 |
 | ||
| accelerator return spring bracket | ||
| designed for magnum 300/380 crate motors w/4 bbl carb intake manifold.developed to hold accelerator pedal return spring in proper relationship to carburetor. | ||
| P4876313 | accelerator spring bracket | 24.50 |
 | ||
Throttle BodyThis cast aluminum, staged 4-bbl Throttle Body flows 1,000 cfm and is designed specifically for 5.2L/ 5.9L Fuel Injection Kits. Uses Delphi TPS and IAC motor. Note: Pinout is different from Delphi IAC and Mopar IAC. | ||
| P5153702 | Throttle Body (5.2L/ 5.9L Fuel Injection Kits) | 505.00 |
 Wire Harness | ||
| P5153687 | Wire harness (5.9L Fuel Injection Kit) | 807.00 |
 Lowering SpringsLowering kit includes all four springs, made of high-tensile material, to increase spring performance without bind. These springs provide a .75" front drop and a 1.5" drop in the rear, to lower and even out your ride. | ||
| P5153728 | Lowering Springs (Jeep Commander) | 441.00 |
 Anti-Sway Bar KitJeep Commander 5.7L Anti-Sway Bar Kit includes both front and rear bars and bushing sets. Bars are made of a high-quality material that ensures durability, and are powder-coated to protect them from the elements. Bars reduce body roll and help to keep the tires fi rmly planted on the ground. Dimensions: Front 35 mm, Rear 22 mm. | ||
| P5153727 | Anti-Sway Bar Kit (Jeep Commander) | 532.00 |
HEMI GRAPHICS FOR DODGE RAMMaterial is Avery 2 mil high-performance cast vinyl film, die-cast and pre-masked. Kit includes step-by-step installation instructions and application squeege.
Hemi Hockey Stick Graphics Kit (Long/Short Bed)Includes hockey stick stripes (bed side driver and passenger) and Hemi hood stripe | ||
| P4510273 | White | 297.00 |
 | ||
Hemi Billboard Graphics Kit (Short Bed Only)Consists of Hemi billboard graphics (bed side driver and passenger) and hood stripe. | ||
| P4510275 | Black | 305.00 |
| P4510277 | Silver Metallic | 305.00 |
 | ||
| VALVE LASH ADJUSTMENT CHART | ||
| P4452989 | Valve lash chart decal | 7.50 |
 |
 |
 |